If you are tired of looking at your shoulders the R&G Mirror Risers will raise your motorcycle mirrors 45mm and allow you to see what you are leaving behind.
Picking that perfect spot to park your motorcycle is not always possible. Help to keep your sidestand from sinking and toppling your ride with the R&G Sidestand Foot Enlarger.
These protective handlebar accessories help to prevent excessive damage to levers and controls in the event that you drop your bike. Installation is simple and takes only seconds for the pair to be screw into place.
This frame plug kit fits both the left and right hand side holes found on the frame of the Ducati Scrambler Sixty2 Scrambler 800 Desert Sled Flat Trck Pro & Monster 797. This R&G Frame Plug Kit will protect your motorcycle from a build up of mud grime and road debris. All year riding can cause corrosion and rust. Fend it off! Please Note: Can fit two sets if <span style="text-de...
The unique texture of this R&G Boot Guard Kit was specifically designed to be virtually indestructible providing the rider with a buffer between his boot and the surface areas of the swingarm. These areas sometimes come into contact with one another during cornering causing wear and unwanted damage to the swingarm or your really cool really expensive footwear!
These swingarm protectors fit into the rear axle of your bike. Held in place thanks to an expanding design enabling super quick and easy installation. These component guards help keep the vital organs of your bike out of harm's way in the event of a crash.
These crash protectors feature R&G's stylish & aerodynamic Black Aero Bobbins. Specially designed spacers enable simple hassle free installation. These frame sliders can be the single defining factor between expensive repairs or just a drop of your bike. Tell the better version of the story!
The R&G front axle sliders fork protectors for Ducati Scrambler Sixty2 & Scrambler 800 safeguard vulnerable front-end components in the event of a fall or slide. HDPE (High Density Polyethylene) bobbins are designed as the first point of contact to protect against impacts and abrasion. These essential fork protectors preserve the front axle suspension fork front brake calipers and rotors which can be very expensive ...
The R&G Engine Case Slider is designed to keep your OEM cover off the ground and minimize damage during a slide or fall. Abrasion resistant polyethylene actually helps to slow the bike down in a slide without catching to cause potentially greater damage. Invest in an extra layer of protection for your Scrambler so you can ride home after a spill instead of losing oil from a damaged case and waiting for a tow tr...
The super good looking brushed aluminum R&G engine case slider was specifically designed for your Scrambler. This slider is manufactured using abrasion resistant polyethylene for its impact strength and friction resistant properties. When this material hits the pavement it takes the impact and keeps your vulnerable and valuable engine case up off the ground. This action prevents cracks and los...
Protect the radiator on your motorcycle with the stylish and effective R&G Oil Cooler Guard. Designed specifically for the Ducati Scrambler 800 & Monster 797 this clean looking protector will keep debris from cutting your ride short and leaving you stranded or with costly repairs. Finished in brushed aluminum and simple to install the R&G oil cooler guard will keep your motorcycle protected and looking great.
The R&G Tail Tidy fender eliminator for your Ducati Scrambler Sixty2 enhances the aesthetics of the rear end by replacing the enormous factory mud guard/license plate holder with a low-profile unit. Stout stainless steel construction is powder coated black for improved durability and corrosion resistance. This attractive tail tidy re-positions the license plate and turn signal indicators directly below the tail...
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D66 includes one D28 and one D38 dry bag to create 66 liters of 100% waterproof storage. Modular packing has significant advantages over a single bag of the same volume. The two-bag D66 system makes packing and organizing your gear easier allows for quicker access to your gear and enables strategic separation of your gear; keeping your clean clothes separate...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D78 Modular Packing System consists of the D38 DrySpec Rigid drybag and the D20 saddlebag set. The D38 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
The DrySpec exhaust heat shield prevents soft luggage and luggage straps from coming in contact with your exhaust. It fits exhausts pipes ranging in size from 4 to 6 inches in diameter and can accommodate non cylindrical exhaust shapes. The heat shield mounts to the exhaust with a stainless steel hose clamp and includes an adhesive ba...
This DENALI Bar Clamp Light Mount Kit allows fitment of any DENALI LED Lights to the outer fork tube on motorcycles, or any tube 50mm-60mm (2"-2.375") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.
These clamps are intended for motorcycles with exposed inverted forks such as enduro, dual sport, and naked motorcycles. The clamps allow lights to be mounted in front of, or to each side of the fork tubes to ensure clearance with fairings and other accessories. The clamps are also perfectly sized to clamp to the lower legs of conventional forks, typically found on many cruiser and standard motorcycles.
Features
Adjustable Grip Range (50mm-60mm)
60mm Light Shelf length
Rotatable Mounting Shelf allows 4th axis of adjustability
Lights can be mounted to shelf or directly to clamp
Accepts M8 Bolt from Light Pod
Billet Aluminum with Black Anodized Finish
What's In the Box?
(x2) Mounting clamps
(x2) Rotatable mounting shelf’s
(x1) Hardware kit
Instruction Manual
The R&G Titanium Radiator Guard Universal Mesh will give your radiator or other vulnerable components protection from airborne and damage causing debris.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G Universal Tank Traction Grip set contains two sheets of a uniquely designed traction grip textured material that is cut in a staggered ridged pattern.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G Universal Tank Traction Grips When you install this set of traction grips you will be gaining better control of your motorcycle reduce fatigue and allow for correct body positioning. These pieces of a specially designed material make gripping your tank easier generating the ability to concentrate on cornering and braking and not slipping and sliding in your seat. The texture is designed so that...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G Universal Tank Traction Grips | 2 Piece Kit - 26cm x 11cm This kit contains two pieces of a specially designed material that is durable and provides more grip on your tank. With the tank traction grips your legs will grasp your tank and you will feel more secure during braking and cornering. The grips reduce the slipping and sliding around on your seat during your ride. These grips not only help ma...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This set of R&G universal tank traction grips includes 2 pieces of synthetic rubber that are cut to fit most tanks. The texture on the pads allows you to grip your tank better and therefore gives you the ability to focus on your handlebar manipulation. Maintaining body position now takes less effort and your relationship with your motorcycle is improved. The traction grips adhere to your tank thanks to a paint frie...
The DENALI universal pivot light mount allows fitment of auxiliary lights to any M5 M6 & M8 hardware location for optimum placement and lighting performance. High strength aluminum is CNC machined for a precision fit and hard anodized black for enhanced durability and corrosion resistance. This versatile light mount increases possible installation points including bodywork fasteners (as long as they are capable of su...
The aluminum material allows the formation of a lightweight yet robust mesh that will prevent rocks bugs or other junk from entering your rad. These situations can be expensive to fix or leave you stranded on the side with an overheated engine. The 12in x 16in size of the covering fits just about any motorcycle and comes with six zip ties to allow for installation.
Designed to fit larger adventure and dual-sport bikes with or without sidecases and topcases. Waterproof outdoor protection with anti-theft features and paint protection built in.
The R&G Cruiser Outdoor Cover fits on the largest cruisers and touring bikes on the market today. Waterproof outdoor protection with anti-theft features and paint protection built in.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.Supplied as a pair
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer amaximum range of positioning on leathers. Double-sided Patch Adapters, with genuine VELCRO® brand fasteners,available separately, allowing R&G Knee Sliders to fit with all types of leathers.VELCRO® is a registered trademark of Velcro Industries B. V.
Double Sided Velcro Patch Adapter for R&G Kneesliders (Kneesliders sold separately) Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.Attaching to your suit via Velcro (Hook) Available in Black, White, Fluoro Yellow or Orange.
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride with easy to install electronics wiring and 5 heat setting adjustments. The grips can heat up to 35°C (95°F) in only 2 minutes and using the control box can increase up to 60°C (140ºF) with only a few taps. Please Note: Maximum power consumption for these heated grips is 4.0 amps per...
R&G's waterproof rucksack is very comfortable and helps to eliminate strain on your back shoulders and neck thanks to the padded back and straps. The adjustable quick release buckle that wraps around your chest also helps eliminate strain while also securing the bag keeping it from moving too much. The Rucksack has a roll down top that is secured by two separate velcro straps and a fully adjustable quick release...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike, R&G made their latest generation Aero Knee Sliders, from a special blend of composite materials to ensure riders gets the best overall performance available.
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry.• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators. Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
This sticker is retro in more ways than one. Besides being RETRO-reflective it is also reminiscent of the cold war era and it's nuclear symbol. Made of vinyl this sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. We have even spotted a few of these as "protectors" for a certain round german motor...
Your exhaust can is likely to be scraped if you drop or crash you bike. You can greatly reduce the damage to the exhaust when an R&G exhaust protector is correctly placed on the exhaust.
After replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators incandescent turn signals (RG.RG370) OR after replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required....
The sew on patch worn by racers sponsored by R&G Racing is now available! Show R&G Racing support on leathers paddock jackets sweatshirts or anywhere you would like.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddoc Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance become a breeze! The open-sided design provides proper support without the use of a centerstand or jackstands.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
