This R&G Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance durability and good looks they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past R&G Engine Case Covers not only save weight ...
This pin kit is suitable for R&G Rear Single-Sided Left Hand Paddock Stand. The stem potion of the pin is manufactured using 6082 T6 aluminum while high-density polyethylene is used in the plastic component.
If you are tired of looking at your shoulders the R&G Mirror Risers will raise your motorcycle mirrors 45mm and allow you to see what you are leaving behind.
The R&G Radiator guard for select Ducati motorcycles safeguards the vulnerable cooling system from debris that can block airflow or cause impact damage. Lightweight aluminum mesh is surrounded by a seamless frame and powder coated for enhanced durability and corrosion resistance. This essential radiator guard is a smart investment for the track and the street as it could prevent damage from bugs and stones that...
The R&G radiator guard for select Ducati motorcycles provides protection for the most vulnerable and essential cooling system component. Lightweight aluminum mesh is surrounded by a seamless frame and powder coated for even greater durability and corrosion resistance. This indispensable radiator guard defends fragile cooling fins from insects stones and other debris which can reduce cooling performance and even cause...
The R&G radiator guard for select Ducati motorcycles provides protection for the most vulnerable and essential cooling system component. Lightweight aluminum mesh is surrounded by a seamless frame and powder coated for even greater durability and corrosion resistance. This indispensable radiator guard defends fragile cooling fins from insects stones and other debris which can reduce cooling performance and even cause...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard for Ducati XDiavel & XDiavel S protects the brake or clutch lever from un-intended interference that could cause a dangerous incident. High quality DuPont Zytel construction is lightweight yet strong enough to defend your controls from bumps and strikes. This effective lever guard is highly recommended to improve safety when riding in groups as a slight bump on the brake lever from a nearby rider c...
The R&G bar end sliders for Ducati Multistrada 950 & Hypermotard 950 protect the original factory handlebar and levers in the event of a fall or slide. High-Density Polyethylene (HDPE) safeguards against impacts and abrasion while helping the motorcycle slide to a smooth controlled stop. These protective bar end sliders provide enough room to keep the clutch and brake levers safely off the ground so you can rid...
The R&G radiator guard for select Ducati motorcycles provides protection for the most vulnerable and essential cooling system component. Lightweight aluminum mesh is surrounded by a seamless frame and powder coated for even greater durability and corrosion resistance. This indispensable radiator guard defends fragile cooling fins from insects stones and other debris which can reduce cooling performance and even cause...
Reduce the risk of damage to your original left side engine case cover during a tip-over or slide with an R&G engine case slider. This protective piece is CNC machined for a perfect fit without the need for drilling or any other modifications. A small mishap could easily cause cosmetic and structural damage to the vulnerable OEM engine case. Don't let a mistake end your ride and leave you with an expensive repair bil...
Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And like your cell phone it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality anti-scratch material the R&G screen protector kit has been designed to preserve the clarity of your mo...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G aero style frame sliders provide essential protection during fall or slide by keeping critical components from contacting the ground. High Density Polyethylene (HDPE) bobbins are abrasion resistant and impact absorbing and designed to be the first point of contact with the pavement to prevent road rash and other severe damage. These protective sliders are mounted to the frame with de-embrittled bolts wh...
The R&G frame plug insert for Select Ducati motorcycles creates a more complete "finished" appearance while providing protection from dirt and debris accumulation within the frame. Machined HDPE (High Density Polyethylene) integrates perfectly with the original design while expanding hardware ensures it stays put. This convenient frame plug will keep the frame of your bike cleaner as road grime dirt and debris...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These R&G Tank Traction Grip kits are designed for the Ducati Hypermotard. Each adhesive pad features a unique texture specially designed for long term durability and comfort. The Traction Grips allow the rider to maintain better bike control while also providing support to achieve the ideal body position when braking and cornering. The grip kit also helps prevent fatigue enabling focus on the road (or track)...
The R&G Stainless Steel Oil Cooler Guard series is a more rugged version of our existing aluminium guard.Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions. The laser-cut grills are designed for maximum airflow to the Oil Cooler so that cooling isn't compromised; the Oil Cooler Guard is as good-looking as it is purposeful.This R&G Oil Cooler Guard is suitable for the Ducati Hypermotard 950 '19- (SP/RVE '21-) models.
The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly at Adventure and Touring bikes. Constructed from stainless steel allowing the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions. The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good looking as it is purposeful. The CNC finished guard attaches easily and quickly to the front of the radiator, either by utilizing the existing mounting bolts or cable tied on. No modifications need to be made to the bike to install.
Our Branded Radiator Guards have been specially designed with bike enthusiasts in mind, each kit containing a unique design made to compliment your bike. These exciting new Branded Radiator Guards are more than just visually outstanding, their stainless steel construction allows the guard to be incredibly strong and impervious to rust. Each laser-cut guard is crafted with a specific bike series in mind, boasting a distinctive design, while still allowing maximum airflow to the radiator so that cooling isn't compromised. The guard attaches easily and quickly to the radiator, by utilising the existing mounting bolts. Made in the UK.No modifications need to be made to the bike to install.
Suitable for the KTM 390 DUKE '16-, KTM 250 Duke '17- and KTM RC390 '16- modelsMade in the U.K.Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and AMA race series approved levels of engine cover protection to your bike for complete peace of mind.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement. All our Lever Guards, including our new Brake Lever Guards, come approved by BSB, MCRCB & MotoAmerica.
R&G Brake Lever Guard for Triumph Daytona 675, Ducati Desert Sled '18-, Suzuki V-Strom 1050 & 1050XT '20- (BLG0004)
Easy to install - taking only a minute or two. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race-approved protection for your road or track bikes. Like so many race-oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider, an R&G Brake Lever Guard is a must-have accessory.
Key Features
BSB approved.
MCRCB approved.
MotoAmerica approved.
Fit to the brake lever side.
Made from DuPont Zytel® 70G33L
Supplied with all required hardware for the bespoke and racing bar applications.
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and comes with our bike specific fitting kit, suitable for the Triumph Daytona 675, Ducati Desert Sled '18-, Suzuki V-Strom 1050 & 1050XT '20-, holds it securely in place.
Available in Black ONLY finish to fit the Ducati Hypermotard 950 '19- & Ducati Hypermotard 950 SP/RVE '21-Made from pressed aluminium and feature a neat, seamless frame (where applicable) like our Radiator Guards. They improve the looks of your bike and help to protect your expensive and vulnerable engine components from flying debris.Specially designed to fit onto the Front Cylinder Head Guard for Ducati Hypermotard 950 '19- & Ducati Hypermotard 950 SP/RVE '21- models. **Radiator Guard NOT included!**No permanent modifications need to be made to the bike.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Its not only your radiator you need to protect. Your oil cooler is a vital component that needs the same great protection. They are available in a black power coated finish and are made from pressed aluminium and feature a neat, seamless frame. Protect your oil cooler from road debris, and make sure a stone doesn't spoil your day.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
Designed to fit larger adventure and dual-sport bikes with or without sidecases and topcases. Waterproof outdoor protection with anti-theft features and paint protection built in.
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry.• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
Givi's first PLX-style sidecase! For use only with Givi PLX sidecarriers or SW-MOTECH Contour sidecarriers; not for use with Givi Monokey standard SW-MOTECH sidecarriers or Five-Stars sidecarriers. Clear lens.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
You have the best gear that the Twisted Team has scoured from every corner of the globe. Take the next logical step and customize your bike further with this collection of light-safe weather-proof vinyl decals.
The Givi M5 Monokey Plate features a streamlined design with rugged nylon construction a black matte finish and is compatible with FZ or SR series GIVI top racks and all Monokey top cases.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Requires Barkbuster Hand Guards specificy bike prior to ordering this product.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
