Enhance the appearance of your rear-end with the R&G Tail Tidy fender eliminator for Ducati 899 Panigale 959 Panigale 1199 Panigale & 1299 Panigale. Lightweight yet strong 3 MM aluminum construction integrates perfectly with the OEM bodywork and original turn signals. This high quality fender eliminator is powder coated black for a low profile appearance that is durable and corrosion resistant. Installation is strai...
This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance durability and good looks they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past R&G Racing Engine Case Covers not onl...
R&G Radiator Guards and Oil Cooler Guard Sets are made from pressed aluminum and feature a neat seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris. No permanent modifications need to be made to the bike. Protects both upper and lower radiators.
The SHOCK2BK R&G Shocktube shock protector preserves the susceptible spring and damper from contaminants that can cause damage debris build up and corrosion. Premium bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon to successfully defend against the elements. This essential Shocktube should be the first addition to any new motorcycle to preserve the rear shock and the per...
The R&G Carbon Fiber engine case slider for Ducati 899 Panigale 1199 Panigale & 1299 Panigale | Stator cover is designed to safeguard the motor from abrasions in the event of a slide. Extremely strong composite construction is feather light and further enhanced with DuPont™ Kevlar® in the impact zone to increase wear resistance. This attractive engine case slider is an excellent aesthetic addition while also providin...
The R&G Rear Axle Sliders for Ducati 899 Panigale Multistrada 950 959 Panigale & Multistrada 1200 Enduro provide protection to vulnerable rear-end components during a tip-over fall or slide. Abrasion resistant / impact absorbing HDPE (High Density Polyethylene) is designed to contact the ground before any of the expensive OEM parts and significantly reduce the risk of damage. These essential rear axle sliders safeg...
Kaoko Cruise Controls are purpose-built for a variety of motorcycles. They consist of a friction nut that is integral with a replacement handlebar-end weight. Kaoko Cruise Control for Ducati Panigale models.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Prevent the stock lockstops on your motorcycle from failing during a crash with R&G Lockstop Savers for Ducati 899 Panigale 959 Panigale 1199 Panigale or 1299 Panigale.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Enhance control reduce fatigue and protect your bike's paint from scratches with the R&G Tank Traction Grips for Ducati 899 Panigale 959 Panigale 1199 Panigale & 1299 Panigale | 4 piece kit.
This 2 Piece R&G Radiator Guard Set is designed with a clean and seamless frame crafted from pressed aluminum. These red powder coated guards really enhance the sleek aesthetics of your Ducati Panigale while providing the utmost protection for the vulnerable and exposed components of your bike. The radiator guard set includes 2 pieces that ward off debris kicked up on the road from damaging or clogging your rad
...
These crash protectors boast sleek looks with aerodynamic & tear shaped bobbins. Install the R&G Aero Style Frame Sliders to save yourself from having to make some seriously expensive repairs in the event of a bike drop or accident. Suitable for the varying models of the Ducati Panigale these crash protectors are uniquely designed with a black powder coated stainless steel bracket with blocks th...
The R&G race series titanium radiator guard for Ducati 899 Panigale 959 Panigale & 1199 Panigale provides maximum protection from bugs dirt and damaging debris that could otherwise cause costly damage. Genuine ATSM Grade 1 Ti alloy screen is surrounded by a seamless aluminum frame and hard anodized for greater durability and corrosion resistance. The Titanium mesh of this premium radiator guard offers twi...
These R&G Spindle Sliders for Ducati Monster 821 Multistrada 950 & 959 Panigale are designed to be mounted inside of the hollow rear axle providing a lifting point for a paddock stand and also serving double duty as sliders. In the event of a slide or crash the swingarm and axle will be protected from sliding directly on the pavement. These sliders install quickly and allow you to work on your bike with the&...
The R&G Boot Guard Kit is designed to protect your swingarm and boots from wear and tear while riding. The unique texture provides a buffer between the rear suspension and your footwear so abrasion is minimized. Without this kit your boots would rub the swingarm and eventually damage the finish on both. Preserve the aesthetics of your new Panigale and your gear or use this kit to refresh the look of your swinga...
The R&G Kickstand Shoe is designed to mount onto the OEM sidestand effectively doubling the footprint to further enhance stability and prevent sinking when parking on hot pavement or softer terrain. A CNC machined aluminum pad sandwiches to the factory stand with a powder coated stainless steel top plate for strength and mounts easily with three Allen bolts. Lean angles and cornering clearance remain unaffected...
The R&G Fork Protectors protect the front end of your Ducati 899 Panigale 959 Panigale 1199 Panigale & 1299 Panigale from contacting the pavement in the event of a fall slide or crash to minimize expensive suspension brake and axle repairs. Abrasion resistant High Density Polyethylene is the same material successfully used in all the sliders as it's designed to absorb an impact and help slow the bike to a stop sm...
The R&G Race Series Engine Case Cover for Ducati 959 Panigale 1199 Panigale & 1299 Panigale is intended to protect the vulnerable exposed clutch cover in the event ...
The R&G Engine Case Cover installs over the factory stator cover to prevent impact and abrasion damage in the event of a drop slide or crash that could leave you stranded or cause catastrophic engine damage. Low profile yet sturdy 4 mm thick polypropylene protects the left side of the motor like a suit of armor to prevent grinding down on the pavement or cracking that would cause loss of oil and contamination...
Damage can occur to your vulnerable axle and swingarm during a crash so get a set R&G cotton reel swingarm spools to add some protection. During a slide the swingarm spools will take the brunt of the impact rather than the aforementioned components saving you time and money. These cotton reels mount directly onto the mounting points on the rear of the swingarm and are designed to complement the awesome look...
This R&G exhaust hanger was designed for the unique exhaust system on the Ducati 959 Panigale. Crafted using 6mm aluminum powder coated and finished with red and white graphics this can hanger looks awesome on your motorcycle. Ditch those lack-luster pillion pegs with the stylish R&G exhaust hanger and wind up riding away with a more aggressive racing look on your motorbike.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard for select Aprilia & Ducati motorcycles defends the brake or clutch lever from accidental interference that could cause serious injury on the racetrack and street. Lightweight DuPont Zytel Nylon is durable and strong to prevent external forces from bumping into your controls and activating the clutch or front brakes. This essential lever guard has become a critical piece of safety equipment on the ...
The R&G race series engine case cover for Ducati 899 Panigale & 959 Panigale with race fairings for the LHS stator cover provides essential protection in the event of a tip over fall or slide. Hearty 4 mm polypropylene is impact absorbing and abrasion resistant to keep the heart of your beast from cracking open or wearing through and causing a catastrophic failure. This beefed up race series cover is equipped with an...
The R&G engine case covers for Ducati 959 Panigale - 2 piece kit protects the vulnerable sections of the motor to significantly reduce the risk of damage in a fall or slide. Robust 4mm polypropylene is utilized for its excellent abrasion resistance and impact absorption. The design of these low profile case covers maximizes cornering clearance and lean angles. Installation is simple and only requires remov...
The R&G race series engine case covers for Ducati 959 Panigale with race fairings - 2 piece kit provides protection to reduce the risk of damaging the very vuln...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Improve your aerodynamics high speed stability and aesthetics with an MRA Racing Screen on your Ducati 959 Panigale & 1299 Panigale. The Racing Screen profile has been developed through extensive wind tunnel testing to significantly decrease pressure on the helmet at high speeds. The 'double bubble' profile helps you tuck in behind the windshield and instead of creating lift it pulls the front of the bike onto th...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Track-day motorcycles tend to spend as much time in the back of a truck or in a trailer as they do on their own two wheels. Crazy huh? But true. It makes sense then that getting them to and from the track safely is an important consideration one made easier by the R&G Tie-Down Hook set. Built to bolt into place where the passenger footpegs normally mount these sturdy tie-down points give you a simp...
The R&G mirror blanking plates for Ducati 959 Panigale & 1299 Panigale secure the fairing after mirror removal while providing a more aggressive appearance. Machined HDPE (High Density Polyethylene) is precision cut for a perfect fit. These slick blanking plates fit in the original mirror mounts without the need for modifications. Aerodynamics are improved along with a new "race ready" aesthetic. Enhance the looks of ...
The R&G Second Skin paint protection film for Ducati 959 Panigale safeguards bodywork from damage to the finish caused by insects stones and other airborne debris. Extremely durable polyurethane is precision cut to fit perfectly for a nearly invisible shield of defense that is also UV stable to prevent yellowing. This premium paint protection is designed to preserve the paint and clear coat from light impact d...
Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And like your cell phone it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality anti-scratch material the R&G screen protector kit has been designed to preserve the clarity of your motorcycl...
These crash protectors boast sleek looks with aerodynamic & tear shaped bobbins. Install the R&G Aero Style Frame Sliders to save yourself from having to make some seriously expensive repairs in the event of a bike drop or accident. Suitable for the varying models of the Ducati Panigale these crash protectors are uniquely designed with a black powder coated stainless steel bracket with blocks th
...
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.Supplied as a pair
This Tank Slider kit is compatible with the Ducati 1199 Panigale (2012 onwards), Ducati 1299 Panigale (2015 onwards), Ducati 899 Panigale (2013 onwards), Ducati 959 (2016 onwards) and Ducati Panigale V2 (2020 onwards) & Ducati Streetfighter V2 '22-.As used by the California Superbike School. (http://www.superbikeschool.com/)Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.Made in the U.K.Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the ‘Lever Guard’ was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but […]
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
This Chain Guard completely replaces the OEM chainguard with a Carbon Fibre chain guard. Ensuring the chain and rear sprocket are covered. Precision made from Carbon Fibre this chainguard is easy to install using existing mounts. Compatible with the Ducati Panigale 899 '13-'15 & 959 '16-.Please note: the Toe Chain Guard (lower sprocket guard) isn't included but is available separately (TG0010C).
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer amaximum range of positioning on leathers. Double-sided Patch Adapters, with genuine VELCRO® brand fasteners,available separately, allowing R&G Knee Sliders to fit with all types of leathers.VELCRO® is a registered trademark of Velcro Industries B. V.
Double Sided Velcro Patch Adapter for R&G Kneesliders (Kneesliders sold separately) Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.Attaching to your suit via Velcro (Hook) Available in Black, White, Fluoro Yellow or Orange.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU; MSVR; MotoAmerica) and required for racing; the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This moulded Lever Guard kit can be fitted to either the brake or clutch sides and has been specifically designed for the models and is available in a range of colour options.
These covers are breathable, soft and elasticated. They can also be spun dry.Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!Made from a high quality breathable material that allows the air to constantly travel through. Available in Black with Silver logo and piping or Red with White logo/piping.
Our premium Race Grips are available for many sportsbikes, with new applications released regularly. The R&G Race Grip texture features a unique pattern with a sleek and dynamic profile. Specifically designed to allow greater movement on the bike whilst ensuring high levels of grip when needed, while being kind to leathers. At a glance• Our premium traction grips for race / advanced trackday use• Specifically cut to size for a perfect fit to the bike• Made from high quality polyurethane• Designed not to wear hard on leathers • Enables the rider to maintain a “locked on” body position• Designed to assist in better bike control• Created to help relieve rider fatigue
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D66 includes one D28 and one D38 dry bag to create 66 liters of 100% waterproof storage. Modular packing has significant advantages over a single bag of the same volume. The two-bag D66 system makes packing and organizing your gear easier allows for quicker access to your gear and enables strategic separation of your gear; keeping your clean clothes separate...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! TechSpec Gripster General Sheets with the center tank protector allow you to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D78 Modular Packing System consists of the D38 DrySpec Rigid drybag and the D20 saddlebag set. The D38 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards crash bars or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.
This elegant horn mount is intended for install...
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Increase storage capacity for small items and important documents that are always within reach using the Givi leg wallet. Made of durable 600D polyester PVC and available in grey black or black/grey with red trim . Each color features reflectivity for enhanced visibility. Adjustable straps allow this versatile leg wallet to be worn around the waist or thigh for quick access that doesn't get in the way while on or of...
If you’re looking for a way to protect your tanks finish from zippers buckles and customary wear and tear then add this R&G modular center tank pad. Easily affix the pads to your tank via the specially formulated adhesive on the reverse side of the pieces. The modular construction of the center tank pad ensures a smooth bond conforming to the curve of your tank. Grab the R&G modular...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G BSB series tank pad will protect the finish on your motorcycles fuel tank from undesired buckle zipper and key scratches. This tank protector is crafted using a flexible resin compound and adheres to your tank via Orafol adhesive which ensures a long lasting bond. These tank pads are UV and scratch resistance and thermally stable. Installation is simple; just use the included alcohol wipe to clean your fue...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
Stay dry in the rain or instantly create an oasis of shade from the hot sun with the R&G umbrella. The large 52" footprint is big enough to provide shelter for you and two friends. To operate this attractive umbrella simply remove the included slip on storage cover unfasten the Velcro strap push the button and voila! An ergonomic foam handle and finger friendly retraction collar enhance comfort and satisfaction dur...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G motorcycle rim tape is a 16 piece modular system designed for adding a touch of bad ass and visibility to your bike. Available in many colors to suit your aesthetic the wheel stripes are easy to install in whatever configuration works for you. The tire rim tape is designed to fit 17" motorcycle wheels with precision. No special tools or techniques required for installation just place and go!
The GIVI TM421 Universal Hand Protectors will keep you riding on those chilly nights and when the leaves start to turn. These motorcycle muffs install over your handguards to give your hands that extra layer of protection from the elements and UFOs. Easily install the GIVI TM421 to just about any motorbike with a set of handguards and discover just how having proper hand protection can increase the comfort and safe...
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in.
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures plus it makes your bike look like a space man.
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your lea...
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride with easy to install electronics wiring and 5 heat setting adjustments. The grips can heat up to 35°C (95°F) in only 2 minutes and using the control box can increase up to 60°C (140ºF) with only a few taps. Please Note: Maximum power consumption for these heated grips is 4.0 amps per...
R&G's waterproof rucksack is very comfortable and helps to eliminate strain on your back shoulders and neck thanks to the padded back and straps. The adjustable quick release buckle that wraps around your chest also helps eliminate strain while also securing the bag keeping it from moving too much. The Rucksack has a roll down top that is secured by two separate velcro straps and a fully adjustable quick release...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike, R&G made their latest generation Aero Knee Sliders, from a special blend of composite materials to ensure riders gets the best overall performance available.
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry (included).• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry (included).• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators. Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
