Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioScreen windscreens are available in clear smoke gray and gloss black. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioTouringScreen windscreens are available in clear smoke gray and gloss black. 12" (304mm) tall x 16" (406mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpeedScreen windscreens are available in clear smoke gray and gloss black. 12.2" (309mm) tall x 15.75" (398mm) middle width x 13" (330mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA X-Creen Bolt-On Variable Windscreen Spoiler Blade is available to fit most original motorcycle windshields. This bolt-on style requires you to drill holes in your existing screen. Available in clear or light smoke.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Will work with or without SW-MOTECH KOBRA or Barkbusters Full-Wrap handguards. Please Note: This item does not need the plastic thrust washer that is shown in the installation instructions and so it is not included in the kit. ...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA X-Creen Sport Add-On Variable Windscreen Spoiler Blade is an ideal size for small scooters and sportbikes. This spoiler is available to fit most original motorcycle windshields to act as an adjustable wind deflector that will be set to redirect the air flow just the way you want it. Available in clear or light smoke.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA Roadshield Classic windscreen is available in clear smoke gray gloss black blue red and yellow. It measures 12.5" (317mm) tall x 16" (406mm) at the widest point.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow X-Creen Sport Screen (style "VFXZ") windshield. The VFXZ is a taller touring sized windscreen with an X-Creen Sport attached to the top. The bottom edge of the VFXZ is designed for motorcycles with angular or dual headlights.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The StreetShield is MRA's smallest screen specially designed to unobtrusively compliment the style of smaller on or off-road naked bikes. It offers good protection for the size. Dimensions: L 14.4" x W 9.3"
The HEX Code GS-911 Tool for BMW motorcycles for is for monitoring information from the engine and other systems on your fuel injected BMW motorcycle. Your motorcycle is equipped with sophisticated electronics that ensure smooth operation within manufacturer specifications. ...
This HEX Code GS-911 Hammerhead Extension Cable allows the user to connect the diagnostic port with this cable to promote easier access for plugging into the GS-911. The 20" lead includes a male connector on one end that connects directly to your bike and a female connector for plugging into the code reader. This extension cable is useful if your port is difficult to access or when collecting real time data while r
...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your motorcycle from road debris and dirt with the R&G Fender Extender. Crafted from durable ABS plastic this guard is designed to block stones grit mud and water kicked up by the front wheel adding protection to your cooling system engine case exhaust pipes and fairing panels. Simple to install this kit mates directly to your motorcycle's front fender or mud shield using adhesive strips and push riv...
Allow your 10 pin diagnostic connector outfitted GS-911wifi to connect to the new generation of EU4 compliant J1962 (OBD II) diagnostic connection equipped motorcycles with the HEX Code EU4 Adapter Cable. Beginning in 2017 all motorcycles will be required to meet EU4 standards which includes the use of OBD II diagnostic connectors. Perfect for enthusiasts who plan to own or service motorcycles spanning these years t...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This MRA Vario Screen Type "A" motorcycle windshield has the same overall shape as the original Vario Screen but with a modified lower edge. Available in clear and smoke gray. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
This HEX Code GS-911 Hammerhead Extension Cable allows the user to connect the diagnostic port with this cable to promote easier access for plugging into the GS-911. The 39 inch lead includes a male connector on one end that connects directly to your bike and a female connector for plugging into the code reader. This extension cable is useful if your port is difficult to access or when collecting real time data while ...
The HEX Code GS-911 Tool for BMW motorcycles for is for monitoring information from the engine and other systems on your fuel injected BMW motorcycle. Your motorcycle is equipped with sophisticated electronics that ensure smooth operation within manufacturer specifications. ...
The HEX Code GS-911 Tool for BMW motorcycles for is for monitoring information from the engine and other systems on your fuel injected BMW motorcycle. Your motorcycle is equipped with sophisticated electronics that ensure smooth operation within manufacturer specifications. ...
Allow your OBD-II diagnostic connector outfitted GS-911 to connect with the older generation of Pre-EU4 compliant J1962 (OBD II) diagnostic connection equipped motorcycles with the HEX Code OBD to 10 Pin Female Adapter. Beginning in 2017 all motorcycles will be required to meet EU4 standards which includes the use of OBD II diagnostic connectors. This cable is perfect for enthusiasts who own or service motorcycles
...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs for the passenger on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
DrySpec D38 Rigid Waterproof Motorcycle Dry Bag
The D38 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D38 features a rigid core that enables the bag to be mounted to any bike with or without a top rack even when the bag is completely empty. Try that with a traditional dry bag! The rigid construction and unique 4-point strap m...
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights these guards offer superb wind protection without limiting access to your grips or controls. Simple to install they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology & amber lenses produces a remarkable amount of light in a very compact package that is perfect for riding in low light/severe weather conditions on any type of motorcycle. With a powerful 10-watt Cree LED the DENALI D2 casts a powerful beam 525ft down the road in your choice of clear or amber for serious foul weather performance and co
...
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 dual license plate LEDs are unbelievably bright and compact for an integrated fit on your license plate. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
...
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 is unbelievably bright and extremely compact. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek low-profile installation.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series lights were specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high intensity LEDs as the D-Series lights b...
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high-intensity LEDs as the D-Series lights but utili...
This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods 90 degrees to any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for installing DRLs down low on your motorcycles front fender or installing DRLs as backup lights on body panels and ATV cargo racks. This mount can also be used to position B6 brake light pods in the ideal...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods to the side of any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for tucking DRLs up inside a motorcycle fairing or positioning a pair of B6 brake light pods to the side of a license plate.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
The new GIVI Trekker 46 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This kit is a...
Note: The Givi E68 Backrest for E36 or E45 luggage cases has been discontinued and is no longer able to be ordered.High-density black rubber backrest for the Givi E45 & E36 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Mounts using included studs and nuts. Requires minor drilling of the topcase using the supplied pa...
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
The RAM "Magnetic Power Plate III" is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets rubber cradle and two adhesive metal plates. To mount your device to the magnet you will need to attach one of the metal plates to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back. This kit...
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
The GIVI MM Monolock Plate features a flat design and is made from aluminum with a black finish. This plate works with all Monolock top cases and only GIVI F series top racks.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
For use with Pro Taper SE (seven-eighths) alloy handlebars and other aluminum handlebars with a smaller internal diameter than standard steel handlebars.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This ...
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles using a 2-point handlebar mount and front fork mount (up to a 50mm fork tube diameter). Mount included. Shape fits a 7" diameter light bulb (8" diameter can) headlight. Features light smoke tint and precision-cut shape. <...
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
