The SHOCK7BK R&G Shocktube shock protector safeguards the vulnerable damper and coil spring to prevent damage from dirt and debris. Premium grade CR Neoprene is double lined with stretch nylon which promotes waterproofness air circulation and impact absorbing characteristics to properly defend against wear and tear. This handy Shocktube is an excellent investment on any motorcycle to significantly exten...
The SHOCK2BK R&G Shocktube shock protector preserves the susceptible spring and damper from contaminants that can cause damage debris build up and corrosion. Premium bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon to successfully defend against the elements. This essential Shocktube should be the first addition to any new motorcycle to preserve the rear shock and the per...
Protect the front end of your H2 with these R&G Fork & Front Axle Protectors that prevent your front end from getting rashed up in the event of a slide or crash. The lower legs axle and brake calipers will not contact the ground and incur damage. Abrasion resistant sliders on each side are held together with a thru-bolt that passes through the hollow front axle to secure the fork protector. Invest in prope...
The R&G boot guard kit for Kawasaki Ninja H2 & Ninja H2R protects the finish on the swingarm from wear and abrasion. Low profile synthetic rubber adheres precisely to the motorcycle with a strong adhesive that stays put. With this handy kit your swingarm will be protected from direct contact with riding boots that can scratch up the finish during everyday riding. Installation is simple and each piece is pre...
The R&G Tail Tidy License Plate Holder is designed to replace the ugly factory fender that extends farther than necessary to clean up the looks for a more svelte low profile appearance. The Powder coated stainless steel unit is designed to bolt-on and retains the use of factory signals or lower profile R&G Incandescent Micro Indicators R&G LED Micro Indicators or the
...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G fender extender for Kawasaki Ninja H2 provides added protection from flying debris launched by the sticky front tire. Strong yet lightweight ABS plastic deflects sand stones and other debris that could damage the vulnerable exhaust headers and radiator while also reducing paint chips and scratches. This protective fender extender easily mounts to the OEM front fender with adhesive strips and pop rivets so som...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The soft and yet durable R&G tank traction grips provide the rider with grip that will assist in improved motorcycle control and body position. These grippy pads will allow you to enhance your cornering skills and help you remain stable during braking maneuvers. After installing the traction grips you will immediately notice you are less tired after a long ride and your neck wrists and shoulders will be less...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging with TechSpec Gripster Tank Grips for your Kawasaki Ninja H2. Stop slipping during hard braking acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in place via a super sticky pai...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard for select Kawasaki sportbikes is designed to bolt onto the right or left side clip on to prevent unintentional contact of the brake or clutch lever from external forces. Sturdy DuPont Zytel Nylon provides protection against impacts during close elbow to elbow racing that could cause a loss of drive (if the clutch is activated) or a dangerous front brake lock up that could result in serious...
Add the R&G stainless steel radiator guard to provide an integral and expensive to repair part of your motorcycle with protection from road debris and bugs. The last thing you want while out on a tour is a punctured rad. Crafted from a 1mm thick sheet of corrosion resistant stainless steel the laser-cut grills will provide maximum airflow to your radiator so cooling efficiency is not compromised. This durable...
The R&G top yoke plug for Triumph Street Triple adds a "finished" appearance to the cockpit of the motorcycle by covering up the exposed steering head nut. Durable HDPE (High Density Polyethylene) is machined for a precision fit with an attractive appearance. This little plug makes a big difference in the look of your top clamp. Press fit installation is super easy and doesn't require modifications. Clean up the cockp...
The R&G single sided paddock stand pin for Kawasaki H2 & H2R 25mm allows the use of a rear stand for maintenance and storage purposes. Designed & engineered in the UK for a precision fit without the need for modifications. Pick up this pin for use with the single sided paddock stand and enjoy servicing/maintaining your H2 with ease.
The R&G frame inserts for Kawasaki Ninja H2 & H2R 7 piece kit enhance aesthetics with a clean finished look while protecting against dust and grime accumulation. Machined HDPE (High Density Polypropylene) offers abrasion resistance with a precise fit utilizing expanding style hardware. These handy frame inserts also make it easier to clean your H2 as those hard to reach tight spots are covered up and protected. Avail...
The R&G swingarm protector for Kawasaki Ninja H2 & H2R safeguards vulnerable rear end components during a fall or slide. Machined HDPE (High Definition Polyethylene) is impact absorbing abrasion resistant and designed to be the first point of contact with the ground instead of expensive OEM parts. This critical swingarm protector defends the rear axle swingarm rear sprocket chain and brake caliper from nasty road ...
The R&G mirror blanking plates for Kawasaki Ninja H2 & H2R secure the upper fairing after removal of the OEM mirrors while also providing a more aggressive low profile appearance. High quality machined HDPE (High Density Polyethylene) creates a perfect fit without the need for drilling trimming or any other permanent modifications. Ditch the mirrors on your H2 (you already know everyone will be behind you anyway) an...
The R&G Second Skin paint protection film for Kawasaki Ninja H2 safeguards bodywork from airborne debris and insects to keep it looking "like new". Extremely durable polyurethane is precision cut to fit perfectly for a nearly invisible shield of defense that is also UV stable to prevent yellowing. This premium paint protection is designed to preserve the paint and clear coat from light impact damage that can leave uns...
Significantly enhance the appearance of your supercharged Ninja H2 with the R&G Tail Tidy fender eliminator. This powder coated stainless steel assembly replaces the entire stock rear fender and taillight mount offering a much cleaner appearance with the license plate tucked much closer to the Kawasaki's tail section. The original turn signals can be retained but upgrading to lower profile R&G LED indicators (sold...
Securely attach your favorite GIVI Tanklock tank bag on Kawasaki H2 SX with the GIVI BF35 Tanklock tank ring. This ring eliminates the need of straps and magnetic attachments previously used to secure tank bags to a motorcycle. Integrated into the base of the Tanklock bag is a small ring that snaps to the corresponding GIVI "tank ring" that is installed on your motorcycle.
The Tanklock tank...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G top yoke plug is an excellent addition to the cockpit sportbike providing a more finished aesthetic. Lightweight aluminum is CNC machined for a precision fit and further enhanced with a hard anodized black or red finish. Clean up the cockpit of your motorcycle with the top yoke plug from R&G!
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Prevent expensive frame and engine damage in the event of a slide with R&G Aero style frame sliders. Used by some of the world’s best race teams these crash protectors are purposely engineered to minimize damage to critical components during high speed mishaps. Replaceable high density polyethylene bobbins designed to slide while wearing down will scrub speed without digging in or grabbing reducing the chances tha...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G Downpipe Grill for Kawasaki Ninja H2 SX adds protection to prevent bugs stones and other debris from accumulating and or damaging the vulnerable factory exhaust header. Lightweight yet sturdy aluminum construction utilizes a mesh screen surrounded by a seamless frame and is powder coated for enhanced durability and corrosion resistance. This protective grill is a wise investment on any motorcycle with...
The R&G swingarm protector safeguards vulnerable rear end components during a fall or slide. Machined HDPE (High Definition Polyethylene) is impact absorbing abrasion resistant and designed to be the first point of contact with the ground instead of expensive OEM parts. This critical swingarm protector defends the rear axle swingarm rear sprocket and chain from nasty road rash. Installation is super simple utilizi...
The R&G boot guard kit for the Ninja H2 SX protects the swingarm and exhaust heat shield from scratches and scrapes. Low profile synthetic rubber pads add minimal thickness and are precision cut to match the design and shape of the factory equipment. These handy boot guards enhance grip with a unique texture that is gentle enough that you won't ruin expensive riding gear. Installation is as easy as it gets just peel ...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Your Ninja H2 SX is a high-performance machine and simply hanging on can be a chore. The R&G tank traction grips enhance your ability to secure yourself to the motorcycle using four self-adhesive synthetic rubber pads. Precision die cut pieces contour to the fuel tank offering a significant improvement in grip. No more slipping and sliding on the glossy fuel tank while trying to maintain proper riding posture. Maintai...
The R&G frame plug insert creates a more complete "finished" appearance while providing protection from dirt and debris accumulation within the frame. Machined HDPE (High Density Polyethylene) integrates perfectly with the original design while expanding hardware ensures it stays put. This convenient frame plug will keep the frame of your bike cleaner as road grime dirt and debris won't collect in the frame vo...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G Radiator Guard for Kawasaki Ninja H2 SX is made from pressed aluminum and features a neat seamless frame. It improves the looks of your bike and helps to protect your expensive and vulnerable radiator from flying debris.
The R&G Second Skin paint protection film for Kawasaki Ninja H2 preserves vulnerable bodywork from damage to maintain a "like-new" appearance for countless miles of touring. Extremely durable polyurethane is precision cut to fit perfectly for a nearly invisible shield of defense that is also UV stable to prevent yellowing. This premium paint protection is designed to preserve the paint and clear coat from light impact...
The R&G Second Skin paint protection film for Kawasaki Ninja H2 preserves vulnerable bodywork from damage to maintain a "like-new" appearance for countless miles of touring. Extremely durable polyurethane is precision cut to fit perfectly for a nearly invisible shield of defense that is also UV stable to prevent yellowing. This premium paint protection is designed to preserve the paint and clear coat from light impact...
The R&G Stainless Steel Radiator Guard is a more robust radiator guard designed to handle some serious riding. Constructed from 1mm stainless steel the radiator guards are incredibly strong and impervious to rust. The laser-cut grill is designed for maximum airflow to the radiator and perfectly compliments the look of your bike! The guard attaches to your bike easily by utilizing existing mounting points. Give your...
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard significantly reduces the risk of accidental lever activation from an exterior force which can lead to a dangerous loss of control. Strong Dupont Zytel construction is available in black blue green orange and red colors and can be mounted to either left or right side handlebar. This versatile lever guard safeguards the brake lever when mounted on the throttle side or the clutch lever when...
The R&G single sided paddock stand pin for Kawasaki H2 SX allows the use of a rear stand for maintenance and storage purposes. Designed & engineered in the UK for a precision fit without the need for modifications. Pick up this pin for use with the single sided paddock stand and enjoy servicing/maintaining your H2 SX with ease.
The R&G engine case cover provides superior protection for the vulnerable exposed section of the motor. Hearty 4mm thick polypropylene construction is molded to fit perfectly over the right-side clutch case cover protecting it from top to bottom. Installation is straightforward and simple utilizing the existing mounting holes without the need for modifications oil loss or gasket replacement. ...
Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And like your cell phone it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality anti-scratch material the R&G screen protector kit has been designed to preserve the clarity of your mo...
This hardware kit allows the mounting of the GIVI PLXR4123 side racks to your Ninja H2 SX without the GIVI 4123FZ toprack. The GIVI 4123KIT does NOT include a complete set of GIVI sideracks and is useless without additional purchase of a GIVI PLXR4123 side rack.
The GIVI PLXR4123 tubular side carriers to fit GIVI V35 & V37 PLX Monokey side cases for Kawasaki H2 will add luggage carrying capacity for added convenience when touring. Sturdy steel construction is powder coated in black for an attractive appearance that improves corrosion resistance and durability. This high-quality side carrier integrates perfectly with factory mounting points without the need for drilling cu
...
Improve versatility with a wide range of hard luggage options by adding the GIVI 4123FZ top rack to fit GIVI Monokey or Monolock top cases on your Kawasaki Ninja H2 SX. Sturdy alloy construction provides a secure foundation for supporting all your gear and supplies. This useful top rack is compatible with the M5 M7 M8A M8B M9A or M9B Monokey plates or with the MONOLOCK M5M adapter plate from GIVI. Mounti
...
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.Supplied as a pair
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Fits Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement. All our Lever Guards, including our new Brake Lever Guards, come approved by BSB, MCRCB & MotoAmerica.
R&G Brake Lever Guard for Kawasaki ZX-6R '05- and ZX10R '06-'20 (BLG0003)
Easy to install - taking only a minute or two. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race-approved protection for your road or track bikes. Like so many race-oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider, an R&G Brake Lever Guard is a must-have accessory.
Key Features
BSB approved.
MCRCB approved.
MotoAmerica approved.
Fit to the brake lever side.
Made from DuPont™ Zytel® 70G33L
Supplied with all required hardware for the bespoke and racing bar applications.
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and comes with our bike specific fitting kit, suitable for the Kawasaki ZX-10R ('06-'20), ZX-6R ('05-), Kawasaki H2 and Kawasaki H2R 2015- models, holding it securely in place.
BSB Approved.
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer amaximum range of positioning on leathers. Double-sided Patch Adapters, with genuine VELCRO® brand fasteners,available separately, allowing R&G Knee Sliders to fit with all types of leathers.VELCRO® is a registered trademark of Velcro Industries B. V.
Double Sided Velcro Patch Adapter for R&G Kneesliders (Kneesliders sold separately) Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.Attaching to your suit via Velcro (Hook) Available in Black, White, Fluoro Yellow or Orange.
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands in style and comfort with R&G Deluxe Motorcycle Gloves.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! TechSpec Gripster General Sheets with the center tank protector allow you to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
If you’re looking for a way to protect your tanks finish from zippers buckles and customary wear and tear then add this R&G modular center tank pad. Easily affix the pads to your tank via the specially formulated adhesive on the reverse side of the pieces. The modular construction of the center tank pad ensures a smooth bond conforming to the curve of your tank. Grab the R&G modular...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G BSB series tank pad will protect the finish on your motorcycles fuel tank from undesired buckle zipper and key scratches. This tank protector is crafted using a flexible resin compound and adheres to your tank via Orafol adhesive which ensures a long lasting bond. These tank pads are UV and scratch resistance and thermally stable. Installation is simple; just use the included alcohol wipe to clean your fue...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
Stay dry in the rain or instantly create an oasis of shade from the hot sun with the R&G umbrella. The large 52" footprint is big enough to provide shelter for you and two friends. To operate this attractive umbrella simply remove the included slip on storage cover unfasten the Velcro strap push the button and voila! An ergonomic foam handle and finger friendly retraction collar enhance comfort and satisfaction dur...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G motorcycle rim tape is a 16 piece modular system designed for adding a touch of bad ass and visibility to your bike. Available in many colors to suit your aesthetic the wheel stripes are easy to install in whatever configuration works for you. The tire rim tape is designed to fit 17" motorcycle wheels with precision. No special tools or techniques required for installation just place and go!
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The R&G Reservoir Sock for Clutch & Brake Fluid | Orange is made of orange elasticized terry cloth with a black R&G logo stitched in. Compatible with any round fluid container mounted to your handlebar. This reservoir sock prevents UV rays from slowly breaking down brake and clutch fluid while also absorbing any overflow spills or splashes that would otherwise severely damage painted surfaces. Sim...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
Increase your ability to be seen at night with the R&G self adhesive license plate reflector. With a 4cm (1.57in) diameter you can mount this just about anywhere you want to catch the attention of a wandering mind. Keep the odds in your favor by installing a license plate reflector by R&G on your motorcycle before your next night ride.
$139.00Original price was: $139.00.$125.10Current price is: $125.10. USD
Free Delivery
In stock
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The GIVI TM421 Universal Hand Protectors will keep you riding on those chilly nights and when the leaves start to turn. These motorcycle muffs install over your handguards to give your hands that extra layer of protection from the elements and UFOs. Easily install the GIVI TM421 to just about any motorbike with a set of handguards and discover just how having proper hand protection can increase the comfort and safe...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your lea...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
This relay is designed to replace your OEM flasher relay following the installation of aftermarket LED turn signals. This particular model features an OEM style connection commonly found on various Honda Kawasaki and Yamaha Motorcycles.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride with easy to install electronics wiring and 5 heat setting adjustments. The grips can heat up to 35°C (95°F) in only 2 minutes and using the control box can increase up to 60°C (140ºF) with only a few taps. Please Note: Maximum power consumption for these heated grips is 4.0 amps per...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
R&G's waterproof rucksack is very comfortable and helps to eliminate strain on your back shoulders and neck thanks to the padded back and straps. The adjustable quick release buckle that wraps around your chest also helps eliminate strain while also securing the bag keeping it from moving too much. The Rucksack has a roll down top that is secured by two separate velcro straps and a fully adjustable quick release...
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
R&G's revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke as well as handlebar guides enabling you to route the ratchet straps away from the bike.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike, R&G made their latest generation Aero Knee Sliders, from a special blend of composite materials to ensure riders gets the best overall performance available.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry.• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Item Compatible With Your 2020 Kawasaki Ninja H2R
Add to cart
-
Information
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry.• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Fit
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
