R&G Radiator Guards and Oil Cooler Guard Sets are made from pressed aluminum and feature a neat seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris. No permanent modifications need to be made to the bike. Protects both upper and lower radiators.
Defend your rear-end during a mishap with the R&G rear axle sliders swingarm protectors for Ducati SuperSport Multistrada 1200 & Multistrada 1260. High Density Polyethylene pucks are designed to contact the ground before expensive OEM components. These essential sliders are abrasion resistant and impact absorbing to significantly reduce the risk of damage during a tip-over fall or slide. Installation is 100% bolt on...
R&G Rear Axle Sliders Spindle Spools is an axle through-bolt design that pulls double duty as an axle and swing arm protector and a spool stand to pick up the rear end for routine adjustments storage and cleaning.
This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance durability and good looks they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past R&G Racing Engine Case Covers not onl...
The R&G Carbon Fiber engine case slider for Ducati 899 Panigale 1199 Panigale & 1299 Panigale | Stator cover is designed to safeguard the motor from abrasions in the event of a slide. Extremely strong composite construction is feather light and further enhanced with DuPont™ Kevlar® in the impact zone to increase wear resistance. This attractive engine case slider is an excellent aesthetic addition while also providin...
Fits Your 2020 Ducati Panigale V2Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Prevent the stock lockstops on your motorcycle from failing during a crash with R&G Lockstop Savers for Ducati 899 Panigale 959 Panigale 1199 Panigale or 1299 Panigale.
Fits Your 2020 Ducati Panigale V2Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Enhance control reduce fatigue and protect your bike's paint from scratches with the R&G Tank Traction Grips for Ducati 899 Panigale 959 Panigale 1199 Panigale & 1299 Panigale | 4 piece kit.
This 2 Piece R&G Radiator Guard Set is designed with a clean and seamless frame crafted from pressed aluminum. These red powder coated guards really enhance the sleek aesthetics of your Ducati Panigale while providing the utmost protection for the vulnerable and exposed components of your bike. The radiator guard set includes 2 pieces that ward off debris kicked up on the road from damaging or clogging your rad
...
These crash protectors boast sleek looks with aerodynamic & tear shaped bobbins. Install the R&G Aero Style Frame Sliders to save yourself from having to make some seriously expensive repairs in the event of a bike drop or accident. Suitable for the varying models of the Ducati Panigale these crash protectors are uniquely designed with a black powder coated stainless steel bracket with blocks th...
The R&G race series titanium radiator guard for Ducati 899 Panigale 959 Panigale & 1199 Panigale provides maximum protection from bugs dirt and damaging debris that could otherwise cause costly damage. Genuine ATSM Grade 1 Ti alloy screen is surrounded by a seamless aluminum frame and hard anodized for greater durability and corrosion resistance. The Titanium mesh of this premium radiator guard offers twi...
The R&G Kickstand Shoe is designed to mount onto the OEM sidestand effectively doubling the footprint to further enhance stability and prevent sinking when parking on hot pavement or softer terrain. A CNC machined aluminum pad sandwiches to the factory stand with a powder coated stainless steel top plate for strength and mounts easily with three Allen bolts. Lean angles and cornering clearance remain unaffected...
The R&G Fork Protectors protect the front end of your Ducati 899 Panigale 959 Panigale 1199 Panigale & 1299 Panigale from contacting the pavement in the event of a fall slide or crash to minimize expensive suspension brake and axle repairs. Abrasion resistant High Density Polyethylene is the same material successfully used in all the sliders as it's designed to absorb an impact and help slow the bike to a stop sm...
The R&G Race Series Engine Case Cover for Ducati 959 Panigale 1199 Panigale & 1299 Panigale is intended to protect the vulnerable exposed clutch cover in the event ...
The R&G Engine Case Cover installs over the factory stator cover to prevent impact and abrasion damage in the event of a drop slide or crash that could leave you stranded or cause catastrophic engine damage. Low profile yet sturdy 4 mm thick polypropylene protects the left side of the motor like a suit of armor to prevent grinding down on the pavement or cracking that would cause loss of oil and contamination...
Fits Your 2020 Ducati Panigale V2Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard for select Aprilia & Ducati motorcycles defends the brake or clutch lever from accidental interference that could cause serious injury on the racetrack and street. Lightweight DuPont Zytel Nylon is durable and strong to prevent external forces from bumping into your controls and activating the clutch or front brakes. This essential lever guard has become a critical piece of safety equipment on the ...
The R&G race series engine case cover for Ducati 899 Panigale & 959 Panigale with race fairings for the LHS stator cover provides essential protection in the event of a tip over fall or slide. Hearty 4 mm polypropylene is impact absorbing and abrasion resistant to keep the heart of your beast from cracking open or wearing through and causing a catastrophic failure. This beefed up race series cover is equipped with an...
The R&G race series engine case covers for Ducati 959 Panigale with race fairings - 2 piece kit provides protection to reduce the risk of damaging the very vuln...
The R&G engine case covers for Ducati 959 Panigale - 2 piece kit protects the vulnerable sections of the motor to significantly reduce the risk of damage in a fall or slide. Robust 4mm polypropylene is utilized for its excellent abrasion resistance and impact absorption. The design of these low profile case covers maximizes cornering clearance and lean angles. Installation is simple and only requires remov...
Significantly enhance the appearance of your motorcycle with the R&G Tail Tidy fender eliminator for your Ducati Panigale V4. This powder coated stainless steel assembly replaces the entire stock rear fender and taillight mount offering a much cleaner appearance with the license plate tucked much closer to the Ducati's graceful tail section. The original turn signals can be retained but upgrading to lower profile...
Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And like your cell phone it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality anti-scratch material the R&G screen protector kit has been designed to preserve the clarity of your mo...
Keep the rear axle housing safe shiny and clean with the R&G Rear Axle Slider & Spindle Blanking Kit for Ducati Monster 1200S & SuperSport. With a silver spacer and black cap tastefully adorned with R&G graphics this cap will add style as it keeps out dirt and debris. With a high density polyethylene crash protector on the left side that is engineered to scrub speed while wearing down without grabbing...
Secure your fairing after mirror removal with the R&G mirror blanking plates for your Ducati. Enjoy enhanced aesthetics with precision machined HDPE (High Density Polyethylene) that integrates perfectly with the original bodywork. These handy blanking plates bolt to the mirror mounts without the need for drilling or any other modifications. Highly recommended for use on the track to improve overall aerodynamics
...
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.Supplied as a pair
R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.
This R&G Carbon Fibre Tail Slider kit is compatible with the Ducati Panigale V4, V4S Speciale '18-'21, V4R '20-, Panigale V2 '20-, Streetfighter V4 (S) '20- & Streetfighter V2 '22-Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
This R&G Carbon Fibre Tail Slider kit is compatible with the Ducati Panigale V4, V4S Speciale '18-'21, V4R '20-, Panigale V2 '20-, Streetfighter V4 (S) '20- & Ducati Streetfighter V2 '22-Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
This Tank Slider kit is compatible with the Ducati 1199 Panigale (2012 onwards), Ducati 1299 Panigale (2015 onwards), Ducati 899 Panigale (2013 onwards), Ducati 959 (2016 onwards) and Ducati Panigale V2 (2020 onwards) & Ducati Streetfighter V2 '22-.As used by the California Superbike School. (http://www.superbikeschool.com/)Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.Made in the U.K.Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Fits Your 2020 Ducati Panigale V2Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the ‘Lever Guard’ was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but […]
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Fits Your 2020 Ducati Panigale V2Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
With bespoke designs for over 350+ models of motorcycle there is bound to be an application for your bike. These are not “mushrooms”! Unlike most of our competitors, we use de-embrittled high-tensile steel bolts which are designed to bend on impact rather than to shear or snap. In addition, we add compression sleeves inside the […]
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer amaximum range of positioning on leathers. Double-sided Patch Adapters, with genuine VELCRO® brand fasteners,available separately, allowing R&G Knee Sliders to fit with all types of leathers.VELCRO® is a registered trademark of Velcro Industries B. V.
Our premium Race Grips are available for many sportsbikes, with new applications released regularly. The R&G Race Grip texture features a unique pattern with a sleek and dynamic profile. Specifically designed to allow greater movement on the bike whilst ensuring high levels of grip when needed, while being kind to leathers. At a glance• Our premium traction grips for race / advanced trackday use• Specifically cut to size for a perfect fit to the bike• Made from high quality polyurethane• Designed not to wear hard on leathers • Enables the rider to maintain a “locked on” body position• Designed to assist in better bike control• Created to help relieve rider fatigue
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
R&G Racing's road-racing inspired toe guard has been developed and designed to give maximum protection combined with great looks. A lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket. This racing Carbon Matt Toe Guard is compatible with the Ducati Panigale 1199 (S) '12-/ 1299 (S) '15-/ Panigale V2 '20-/ Streetfighter V2 '22- models.
Our all-new Stainless Steel Bar Endshave been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.
Universal Item Compatible With Your 2020 Ducati Panigale V2 Add to cart
-
Information
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
Universal Item Compatible With Your 2020 Ducati Panigale V2 Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in.
Universal Item Compatible With Your 2020 Ducati Panigale V2 Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures plus it makes your bike look like a space man.
Universal Item Compatible With Your 2020 Ducati Panigale V2 Add to cart
-
Information
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry (included).• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Item Compatible With Your 2020 Ducati Panigale V2 Add to cart
-
Information
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry (included).• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
The RAM "Magnetic Power Plate III" is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets rubber cradle and two adhesive metal plates. To mount your device to the magnet you will need to attach one of the metal plates to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back. This kit...
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.