R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum grou...
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.
R&G engine case slider was designed to fit the left hand side (LHS) case cover. Right hand case slider also available here: RG.ECS0002BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance ultra lightweight matte finish and protecting one ...
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
R&G engine case slider was designed to fit the right hand side (RHS) case cover. Left hand case slider also available here: RG.ECS0001BK Crafted from High Density Nylon for strength durability and good looks. They compliment the R&G crash protectors perfectly. The covers simply bolt on over the original engine casing. Slimline for maximum ground clearance ultra lightweight matte finish and protecting one ...
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum grou...
The SHOCK2BK R&G Shocktube shock protector preserves the susceptible spring and damper from contaminants that can cause damage debris build up and corrosion. Premium bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon to successfully defend against the elements. This essential Shocktube should be the first addition to any new motorcycle to preserve the rear shock and the per...
These R&G Fork Protectors are cheap insurance. Have you seen the price of new forks lately? They are expensive and will get damaged in the event of a crash or even a tip-over. The R&G Fork Protectors help prevent damage and scratches by keeping the fork end cap and brake caliper off the ground when your bike is no longer on its wheels. They can also help prevent damage to your bike's axle brake rotors and...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Minimize the debris flung by the front tire with the R&G Fender Extender for Yamaha YZF-R6. YZF-R1 MT-10 & FZ-10. Lightweight ABS plastic increases coverage over the factory unit to deflect sand stones and other debris. Preserve the critical oil cooler and radiator from build up and possible damage caused by the motorcycles own front tire. This handy fender extender also helps to keep the bike and expensive riding g...
Protect the vulnerable crankcase on your motorcycle with the R&G Race Series Engine Case Cover for your Yamaha YZF-R6. Featuring a replaceable High Density Polypropylene slider puck that is designed to take the brunt of the contact the protector is constructed of 4mm thick polypropylene. Keep your motorcycle rolling and prevent expensive repairs with a Race Series Engine Case Cover by R&G.
Keep a drop from crippling your motorcycle by protecting the left side crankcase of your Yamaha YZF-R6 with an R&G Race Series Engine Case Cover. With a 4mm molded polypropylene casing and a replaceable High Density Polypropylene slider puck located at the predominant contact point this cover will offer superb protection on the street or track. Keep on riding with a race series engine case cover by R&G.
Protect the heart of your Yamaha YZF-R6 with an R&G Racing Engine Case Cover Kit. Robust 4 mm thick polypropylene bolts directly to the original equipment with no need to replace gaskets or lose a drop of oil. These essential case covers absorb energy during an impact with the ground to minimize the chance of cracking while also resisting abrasion to prevent wear through during a slide. No drilling cutting or any oth...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard for Suzuki GSX-S750 Triumph Street Triple R S and RS 765 significantly reduces the risk of accidental lever activation from an exterior force which can lead to a dangerous loss of control. Strong Dupont Zytel construction is available in black blue green orange and red colors and can be mounted to either left or right side handlebar. This versatile lever guard safeguards the brake leve...
The R&G Tail Tidy fender eliminator for Yamaha YZF-R6 enhances the aesthetics of the rear end by replacing the enormous factory mud guard/license plate holder with a low-profile unit. Stout stainless steel construction is powder coated black for improved durability and corrosion resistance. This attractive tail tidy re-positions the license plate and turn signal indicators directly below the tail light so they...
The R&G toe chain guard for Yamaha YZF-R1 or YZF-R6 significantly reduces the risk of injury by deflecting hands arms toes and feet from getting pulled into the rear sprocket during a fall or slide. High quality aluminum construction is lightweight yet strong and finished in a durable powder coated black finish. This protective toe guard is highly recommended for improving your safety out on the track and the street...
The R&G swingarm sliders for Yamaha YZF-R6 reduce the risk of damage to vulnerable rear end components in the event of a fall or slide. Abrasion resistant impact absorbing HDPE (High Density Polyethylene) is used to prevent expensive OEM parts getting ground down on the pavement. This protective swingarm slider is highly recommended for use on the track and the street as it safeguards the swingarm itself the...
The R&G adjustable rear sets for Yamaha YZF-R6 road & race shift pattern improve control and grip with precise peg adjustability and added cornering clearance or additional leg room. High quality aluminum is CNC machined for lightweight strength with attractive aesthetics. These sharp looking rear sets are hard anodized black to improve durability and protect against corrosion. Choose from multiple peg positions; high...
Secure your fairing after mirror removal with the R&G mirror blanking plates for Yamaha YZF-R6. Enjoy enhanced aesthetics with precision machined HDPE (High Density Polyethylene) that integrates perfectly with the original bodywork. These handy blanking plates bolt to the mirror mounts without the need for drilling or any other modifications. Highly recommended for use on the track to improve overa...
The R&G offset cotton reel swingarm spools for Yamaha YZF-R6 provide protection in the event of a fall or slide while also serving as a secure lifting point on the rear end. Hearty machined aluminum axle blocks replace the original equipment and position the protective bobbins so they are clear of the exhaust system throughout suspension travel. Robust swingarm spools are machined from impact absorbing and abra...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G aero style frame sliders for Yamaha YZF-R6 provides critical protection for the frame fairings and engine cases during a fall or slide. Impact absorbing and abrasion resistant High Density Polyethylene (HDPE) bobbins are the first point of contact with the pavement to prevent serious damages. The aero style sliders are mounted to a special bracket which allows secure fitment to the frame without the ne...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G Downpipe Grill for Yamaha YZF-R6 adds protection to prevent bugs stones and other debris from accumulating and or damaging the vulnerable factory exhaust header. Lightweight yet sturdy aluminum construction utilizes a mesh screen surrounded by a seamless frame and is powder coated for enhanced durability and corrosion resistance. This protective grill is a wise investment on any motorcycle with a stick...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G radiator guard for Yamaha YZF-R6 provides exceptional protection for the very vulnerable radiator. Lightweight yet strong aluminum construction deflects bugs stones and other debris that can damage fragile cooling fins and even cause a puncture. This essential radiator guard is an excellent investment on any motorcycle with sticky tires especially the R6. Each unit is powder coated for an enhanced app...
Clean up aesthetics with the R&G rear foot rest blanking plates for Yamaha YZF-R6 after removing the passenger foot peg mounts. Lightweight aluminum plates provide a precision fit and are finished in a durable powder coated black finish. These handy blanking plates utilize original bolt holes in the sub-frame and provide a finished appearance that also prevents dirt and debris (thrown by the rear tire) from collecting...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G tie down hooks for Yamaha YZF-R6 provide a secure strapping point on the tail of the motorcycle after removal of the passenger foot pegs. High quality aluminum construction is lightweight yet strong and finished in a hard anodized black or gold color for improved aesthetics durability and corrosion resistance. These handy hooks are great for securing the tail during transport with the use of ratchet straps while ...
The R&G paddock stand hooks are designed for quick and easy engagement to lift the rear-end of your bike off the ground. High quality aluminum is CNC machined for a precision attractive appearance and superior strength. These handy hooks are finished in a durable hard anodized black finish which integrates perfectly with OEM components. Pick up a paddock stand if you don't have one already and enjoy how simple it is ...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get the TechSpec Gripster Tank Grips for your Yamaha YZF-R6 and you'll experience solid tank grip without any gear snagging. Stop slipping during hard braking acceleration and cornering maneuvers by adding the TechSpec Gripster tank grips to your motorcycle. These super grippy pads are precision cut to suit the contours of your tank. The low profile grips are fabricated using synthetic rubber and stay in pl...
Maintain better body position and precise control with R&G tank traction grips for the Yamaha YZF-R6. Available in black the soft yet durable texture of this kit allows your legs to stick to your motorcycle which reduces fatigue and increases feedback. With high strength self-adhesive backing these pads are simple to install and will stay put even through hard riding. Ride your R6 with more confidence and install a...
The R&G exhaust protector for your Yamaha R6 reduces the risk of damage to the bike's exhaust muffler in the event of a tip over slide or crash. High Density Polyethylene is impact and abrasion resistant so your muffler doesn't get "rashed" and scraped up on the pavement. This handy protector could save you from expensive repair or replacement costs and makes an excellent investment on any motorcycle for a relatively...
Preserve your fairings to keep them looking good as new with the R&G Second Skin paint protection film for Yamaha YZF-R6. Extremely durable polyurethane is precision cut to fit perfectly for a nearly invisible shield of defense that is also UV stable to prevent yellowing. This premium paint protection is designed to preserve the paint and clear coat from light impact damage that can leave unsightly stains and permanen...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Improve your aerodynamics high-speed stability and aesthetics with an MRA Racing Screen on your Yamaha YZF-R6. Available in black clear and smoke grey. The Racing Screen profile has been developed through extensive wind tunnel testing to significantly decrease pressure on the helmet at high speeds. The 'double bubble' profile helps you tuck in behind the windshield and instead of creating lift ...
The R&G kickstand shoe is an effective way to keep your motorcycle from falling over when parked on a soft surface. A sturdy CNC machined aluminum pad doubles the surface area of the OEM side stand to prevent sinking into dirt gravel grass and even hot asphalt. This handy kickstand shoe minimizes the risk of your bike taking an unplanned dirt nap. Drilling cutting or any other permanent modifications are not requir...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G aero style frame sliders for Yamaha YZF-R6 provide critical protection by keeping the motorcycle off the ground during fall or slide. Abrasion resistant and impact absorbing High Density Polyethylene (HDPE) bobbins are designed to be the first point of contact with the pavement to prevent road rash and other serious damage. These protective sliders are secured to the frame with de-embrittled bolts which...
The R&G frame plug insert for Yamaha YZF-R6 creates a more complete "finished" appearance while providing protection from dirt and debris accumulation on the upper right side of the frame. Machined HDPE (High Density Polyethylene) integrates perfectly with the original design while expanding hardware ensures it stays put. This convenient frame plug will keep the frame of your bike cleaner as road grime dirt and debri...
The R&G frame plug insert for Yamaha YZF-R6 creates a more complete "finished" appearance while providing protection from dirt and debris accumulation on the upper left side of the frame. Machined HDPE (High Density Polyethylene) integrates perfectly with the original design while expanding hardware ensures it stays put. This convenient frame plug will keep the frame of your bike cleaner as road grime dirt and debris...
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs for the passenger on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
A Kaoko Throttle Stabilizer cruise control enhances operation of the throttle resulting in reduced fatigue improved comfort on extended rides and greater smoothness on bumpy roads or terrain. The YAM200 unit is for Yamaha YZF-R6 with threaded handelbars. Roll the throttle lock back to hold the grip in place on extended highway trips and give your right hand / arm a break no need to disrupt your adventure and pull ov...
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.Supplied as a pair
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
This Tank Slider (pair) kit is compatible with the Yamaha YZF-R6 '17- models.As used by the California Superbike School. (http://www.superbikeschool.com/)Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.Made in the U.K.Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
Fits Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement. All our Lever Guards, including our new Brake Lever Guards, come approved by BSB, MCRCB & MotoAmerica.
R&G Brake Lever Guard for Triumph Daytona 675, Ducati Desert Sled '18-, Suzuki V-Strom 1050 & 1050XT '20- (BLG0004)
Easy to install - taking only a minute or two. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race-approved protection for your road or track bikes. Like so many race-oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider, an R&G Brake Lever Guard is a must-have accessory.
Key Features
BSB approved.
MCRCB approved.
MotoAmerica approved.
Fit to the brake lever side.
Made from DuPont™ Zytel® 70G33L
Supplied with all required hardware for the bespoke and racing bar applications.
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and comes with our bike specific fitting kit, suitable for the Triumph Daytona 675, Ducati Desert Sled '18-, Suzuki V-Strom 1050 & 1050XT '20-, holds it securely in place.
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer amaximum range of positioning on leathers. Double-sided Patch Adapters, with genuine VELCRO® brand fasteners,available separately, allowing R&G Knee Sliders to fit with all types of leathers.VELCRO® is a registered trademark of Velcro Industries B. V.
Double Sided Velcro Patch Adapter for R&G Kneesliders (Kneesliders sold separately) Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.Attaching to your suit via Velcro (Hook) Available in Black, White, Fluoro Yellow or Orange.
These lower/rear crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Yamaha YZF-R6 '06 -. R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!
The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks. Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.
This 3-piece Boot Guard kit has been specially designed for the Yamaha YZF-R6 '17 models.R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both expensive to fix!).Please note: Frame plugs ARE NOT included, but are available separately.Please note: R&G Boot Guards now come with a 25mm diameter stick-on emblem.Made in the UK.
Our premium Race Grips are available for many sportsbikes, with new applications released regularly. The R&G Race Grip texture features a unique pattern with a sleek and dynamic profile. Specifically designed to allow greater movement on the bike whilst ensuring high levels of grip when needed, while being kind to leathers. At a glance• Our premium traction grips for race / advanced trackday use• Specifically cut to size for a perfect fit to the bike• Made from high quality polyurethane• Designed not to wear hard on leathers • Enables the rider to maintain a “locked on” body position• Designed to assist in better bike control• Created to help relieve rider fatigue
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Suitable for the Yamaha YZF-R6 '08- Low Profile, Race version Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and AMA race series approved levels of engine cover protection to your bike for complete peace of mind.Made in the U.K.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
Just what you need with no frills. Get all the supplies and parts you need to wire your horn to your bike without having to go to the hardware store and still wonder if you have everything. Uses an ATC inline fuse instead of a typical fragile glass fuse.
$159.99Original price was: $159.99.$111.99Current price is: $111.99. USD
Free Delivery
Low stock
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
Made from lightweight aluminium for high strength and durability.Powdercoated in black with crisp white R&G graphics on the peg.Compatible with any/all R&G RearsetsSold individually.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
$68.00Original price was: $68.00.$61.20Current price is: $61.20. USD
Free Delivery
Available to backorder
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
$27.00Original price was: $27.00.$24.30Current price is: $24.30. USD
Free Delivery on orders over $50
Low stock
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Increase storage capacity for small items and important documents that are always within reach using the Givi leg wallet. Made of durable 600D polyester PVC and available in grey black or black/grey with red trim . Each color features reflectivity for enhanced visibility. Adjustable straps allow this versatile leg wallet to be worn around the waist or thigh for quick access that doesn't get in the way while on or of...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
$139.00Original price was: $139.00.$125.10Current price is: $125.10. USD
Free Delivery
In stock
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The GIVI TM421 Universal Hand Protectors will keep you riding on those chilly nights and when the leaves start to turn. These motorcycle muffs install over your handguards to give your hands that extra layer of protection from the elements and UFOs. Easily install the GIVI TM421 to just about any motorbike with a set of handguards and discover just how having proper hand protection can increase the comfort and safe...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures plus it makes your bike look like a space man.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
Improve cornering clearances while enhancing overall grip with the R&G racing foot peg for adjustable rearsets | 60 MM short version. Lightweight aluminum is hard anodized for enhanced durability with corrosion resistance and topped off with a contrasting white logo on the HDPE (High Density Polyethylene - the same abrasion resistant material used in the successful frame and axle sliders) end cap. This compact foot pe...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
This relay is designed to replace your OEM flasher relay following the installation of aftermarket LED turn signals. This particular model features an OEM style connection commonly found on various Honda Kawasaki and Yamaha Motorcycles.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride with easy to install electronics wiring and 5 heat setting adjustments. The grips can heat up to 35°C (95°F) in only 2 minutes and using the control box can increase up to 60°C (140ºF) with only a few taps. Please Note: Maximum power consumption for these heated grips is 4.0 amps per...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
R&G's waterproof rucksack is very comfortable and helps to eliminate strain on your back shoulders and neck thanks to the padded back and straps. The adjustable quick release buckle that wraps around your chest also helps eliminate strain while also securing the bag keeping it from moving too much. The Rucksack has a roll down top that is secured by two separate velcro straps and a fully adjustable quick release...
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike, R&G made their latest generation Aero Knee Sliders, from a special blend of composite materials to ensure riders gets the best overall performance available.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
This 6-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry (included).• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Item Compatible With Your 2017 Yamaha YZF-R6
Add to cart
-
Information
This 6-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance. • Only use Manufacturer torque settings, between 33 - 45nm. • Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. • Please check the thread fitment by hand, before using tools - this will help prevent accidental damage. • Fit R&G Sprocket Nuts along with a medium thread lock, after cleaning bolt threads of all corrosion and dirt. Titanium requires an anti-galling lubricant and must not be fitted dry (included).• This is a critical safety component - it must be fitted by a competent mechanic. • To avoid marking the Sprocket Nuts, use a 6-sided socket and stretch a rubber glove (or similar) over the socket before trying to tighten up. • Clean as part of your regular maintenance, and protect with a corrosion inhibitor.
Universal Fit
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
