These R&G Fork Protectors are cheap insurance. Have you seen the price of new forks lately? They are expensive and will get damaged in the event of a crash or even a tip-over. The R&G fork protectors help prevent damage and scratches by keeping the fork end cap and brake caliper off the ground when your bike is no longer on its wheels. This motorcycle protection can also help prevent damage to your bike's a...
Pick up R&G fork protectors and ride on with this affordable insurance for the front end of your bike. New parts are pricey and can take a good amount of time to repair. Protect your road time and your motorcycle's axle brake rotors wheel and forks with these impact absorbing fork protectors. The protective guards help prevent scratches and damage by keeping the fork end cap and brake caliper off the gro
...
The R&G Tail Tidy fender eliminator for your KTM RC 390 enhances the aesthetics of the rear end by replacing the enormous factory mud guard/license plate holder with a low-profile unit. Stout stainless steel construction is powder coated black for improved durability and corrosion resistance. This attractive tail tidy re-positions the license plate and turn signal indicators directly below the tail light so the...
The R&G engine case cover for your KTM RC 390 defends the original clutch cover from damage in the event of a fall or slide. Sturdy 4mm polypropylene construction maintains a low profile by fitting snugly around the factory unit so cornering clearances aren't compromised. This protective case cover absorbs impacts and resists abrasions so your engine case doesn't wear through and leak engine oil or worse; conta...
Fits Your 2016 KTM RC 390Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
R&G cotton reel swingarm spools provide impact and abrasion protection for the rear-end of your motorcycle while also serving as a lifting point for general maintenance. These cotton reels are constructed from HDPE (High Density Polyethylene) and are used to defend the rear swingarm rear axle rear sprocket rear brake rotor and caliper from contact with the ground. They are also designed for use with a paddock stan...
Fits Your 2016 KTM RC 390Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement. All our Lever Guards, including our new Brake Lever Guards, come approved by BSB, MCRCB & MotoAmerica.
R&G No-Cut Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Orange. Suitable for the RC 125 '14-'21 / RC 200 '14-'21 and RC 390 '14-'21 models.R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.
Universal Item Compatible With Your 2016 KTM RC 390 Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
You have the best gear that the Twisted Team has scoured from every corner of the globe. Take the next logical step and customize your bike further with this collection of light-safe weather-proof vinyl decals.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
The sew on patch worn by racers sponsored by R&G Racing is now available! Show R&G Racing support on leathers paddock jackets sweatshirts or anywhere you would like.
Package contains four 2amp four 3amp two 5amp two 7.5amp two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Please Note: This product is no longer available for purchase.The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The sleek aerodynamic design of the Givi E360 Delux makes it a popular choice for most of today's modern motorcycles. The E360 has a wide perimeter band with an attractive red accent and an easy-to-grip handle. The aerodynamic style deceptively hides a spacious 40 liter carrying capacity. This case is an excellent choice for a topcase.
The slip-lock straps were developed by DrySpec to create the strongest lowest profile mounting solution. The tri-glides on the ends of each strap are designed to slip through and lock into the one inch hardware loop on the bag. This strap set is included with the DrySpec D38 and D20. Includes two loop-end slip-lock straps and one double-end slip-lock strap (for the rear mounting point).
The mounting kit includes the proper size drill bit hex head screws sealing washers and large exterior washers as detailed in the Installation Instructions attached below. If you would like to attach the Tool Tube using an alternate method please order the optional Mounting Brackets.
The DrySpec exhaust heat shield prevents soft luggage and luggage straps from coming in contact with your exhaust. It fits exhausts pipes ranging in size from 4 to 6 inches in diameter and can accommodate non cylindrical exhaust shapes. The heat shield mounts to the exhaust with a stainless steel hose clamp and includes an adhesive ba...
The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow t...
Universal Item Compatible With Your 2016 KTM RC 390 Add to cart
Information
This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards crash bars or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.
This elegant horn mount is intended for install...
At 113 decibels the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough be heard with the SoundBomb Mini.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The Givi V56 Maxia 4 56 Liter Monokey Topcase is the fourth generation of the Maxia line with modern angular design and internally strengthened ABS plastic construction. Look no further if you like to bring everything with you this luggage case is able to swallow two full face helmets with room left over for additional gear. The V56 will keep your belongings safe from bad weather and thieves with a full gasket su
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The Givi V40 Monokey Topcase is an excellent choice for hard luggage on any motorcycle. Available with red or smoked reflective lenses to suit your style and enhance visibility. The case body is finished in matte black and is compatible with the Givi Monokey system that allows the luggage to be opened closed locked and removed from the rack with the same key. When locking the lid the bag itself is also locked to th...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
The B47 Blade topcase offers a whopping 47 liters of storage and can fit two open face helmets. This topcase features a new sealing system that increases the water resistance and the distinctive angled reflectors add some modern aesthetic appeal.
This Givi topcase will install easily to a Givi or SW-MOTECH type toprack and includes a Monoloc...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Givi B360 Monolock Topcase (Ea) - 36 Liters/Case With a carrying capacity for either 1 modular helmet and some other riding essentials or 2 Jet helmets with an extra jacket liner on top the Givi B360 is just the right size for your scooter or smaller commuter motorcycle. The B360 has 36 liters of space and can hold up to 6.5 lbs. Givi designed this case to have a sleek and modern look and atta...
The DENALI "All-On" Combination Low Beam With High Beam Conversion H4 Wiring Harness keeps the low beam on with the high beam activated. Enjoy dramatically improved light output that also increases overall visibility significantly. Simple plug and play installation allows the adapter to plug "inline" between the DENALI M5...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
Add some vintage-cool styling to your wardrobe with this Twisted Throttle "Classic" ladies motorcycle T-shirt. Sporting a super-cool distressed retro graphic on a charcoal gray background this apparel will probably earn you a double take or two. The relaxed yet form-fitting apparel hugs you in all the right places with an always flattering scoop neck. This ladies "Classic" motorcycle T-shirt is lightweight and thin...
The DENALI interactive 3 horn dealer display system with harness was created because each SoundBomb horn is so loud you simply have to hear it to believe it. Sturdy metal construction allows mounting of the compact unit to a counter-top or slat wall and uses only a standard motorcycle battery (not included) to provide power. This DENALI horn display is guaranteed to grab your customers' attention and is completely FREE with qualifying DENALI orders of $2000 or more. Power draw and decibel ratings are listed for the each of the 3 different versions and controlled by separate buttons located just below each product. Add this very effective 3 horn display to your showroom and service area and enjoy a significant boost in retail sales and installations of DENALI SoundBombs!
This DENALI 2.0 Premium wiring harness kit features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powe...
The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights separate from the vehicle's OEM lighting system. This allows you to change from low intensity to full brightness on motorcycles with OEM LED headlights that don't have a clean 12V high beam trigger signal. This switch is also a great option for those who want full independent contr...
The DENALI Power Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition.
The DENALI M4 LED Passing Lamp Module is a direct plug and play replacement for your original 4 1/2 inch passing lamp sealed beams. It features a super bright main beam and a halo day time running light. Drop this passing lamp module into the existing passing lamp housing to create a piercing beam of white light that is the perfect combination of distance and width. The unique styling and black chrome finish will g...
The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology & amber lenses produces a remarkable amount of light in a very compact package that is perfect for riding in low light/severe weather conditions on any type of motorcycle. With a powerful 10-watt Cree LED the DENALI D2 casts a powerful beam 525ft down the road in your choice of clear or amber for serious foul weather performance and co
...
Seeing is believing! Once your customers see the power of the DENALI 2.0 M4 they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Seeing is believing! Once your customers see the power of the DENALI 2.0 DM they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
p>Seeing is believing! Once your customers see the power of the DENALI 2.0 M5 they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Once your customers' ears stop ringing from trying out the SoundBomb Split Horn they will be sold on the safety benefits of the earsplitting 120db of sound. This is 4 times louder than the typical pathetic horn that comes on most motorcycles.
The interactive dealer display is powered from a standard motorcycle battery (not included) Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Seeing is believing! Once your customers see the power of the DENALI M7 headlight they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Once your customers ears stop ringing from trying out the Soundbomb Mini Horn they will be sold on the safety benefits of the earsplitting 113db of sound. This is 2 times louder than the typical pathetic horn that comes on most motorcycles. The interactive dealer display is powered from a standard motorcycle battery (not included) Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Once your customers ears stop ringing from trying out the SoundBomb Split Horn they will be sold on the safety benefits of the earsplitting 120db of sound. This is 4 times louder than the typical pathetic horn that comes on most motorcycles. The interactive dealer display is powered from a standard motorcycle battery (not included) Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Seeing is believing! Once your customers see the power of the DENALI 2.0 B6 they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Seeing is believing! Once your customers see the power of the DENALI 2.0 D4 they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
Seeing is believing! Once your customers see the power of the DENALI 2.0 D2 they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
The DENALI Y-Splitter powers two DENALI B6 or DRL LED lights from one harness! Use it to remove the mess from your wiring and make installation a breeze. Plug-n-play connectors simply plug into both DENALI DRL/B6 lights (sold separately) which can then be tapped into your power source. Enhance your DENALI B6 / DRL installation and pick up a Y-Splitter before your next ride.
Once your customers see the flexibility and intelligence of the CANsmart Controller they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet or by using the included battery power wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isnt available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included).
The DENALI E-Mark approved M7E LED Headlight module is a direct plug and play replacement to the original 7in sealed beam headlight on your motorcycle. It features a super wide low beam piercing high beam and halo day time running light. Drop this headlight module inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a sto...
The DENALI E-Mark approved M5E LED Headlight module is a direct plug and play replacement to your original 5.75in sealed beam headlight. It features a super wide low beam piercing high beam and halo day time running light. Drop this headlight module inside your motorcycle's existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek low-profile installation.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 dual license plate LEDs are unbelievably bright and compact for an integrated fit on your license plate. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
...
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 is unbelievably bright and extremely compact. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
This DENALI Harness Extension can be used to extend the lead of your B6 or DRL light by 48 inches. Equipped with one male and one female miniature three-pin connector at each end the harness lovingly encircled in abrasion-resistant wrap for security and a clean-looking installation.
Use this DENALI Wiring Adapter to easily connect a set of DRLs to a DENALI Auxiliary Light Harness or CANsmart Controller. The pass through design allows the DRL Lights to be added to the light circuit in addition to the Auxiliary LED Lights.
This DENALI MT Series 3-Pin Male waterproof connector pigtail can be used to adapt other brands of lighting or accessories to the DENALI CANsmart Controller or DENALI 2.0-series Premium Wiring Harness. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice.
This MT Series DENALI 2-Pin Male Waterproof Connector Pigtail can be used to adapt other brands of lighting or accessories to the DENALI CANsmart Controller. The connector is pre-assembled with 3 inch 18 AWG wires exiting the connector which can be soldered onto the light or accessory of your choice.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
The DENALI Terminal Crimping Tool can be used to properly crimp the terminals of the DENALI Waterproof Connector Sets. The crimper features a ratcheting mechanism design with adjustable crimping compression and can crimp male and female terminals (0.1-1mm) to 28-18 AWG wire.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector crimp-on terminals as well as waterproofing wire seals. Using an affordable crimping tool these connectors can be crimped onto wires in seconds to modify customize or replace electrical connections.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
Information
If you're looking for a rucksack for your motorcycle then check out the GIVI EA115 Easy-T waterproof cylinder bag. The two included straps allow for easy attachment to either your seat rear rack or luggage case. Manufactured out of PVC tarpaulin this bag sports a roll down design high-frequency sealed seams tear and abrasion resistance that ensures your rider essentials remain dry. GIVI has added both a carry ha
...
Seeing is believing! Once your customers see the power of the DENALI DRL Visibility Pods they'll be sold. The interactive dealer display can be plugged directly into a 100v-240v outlet. Or when using the included wiring adapter the display can be powered from a standard motorcycle battery perfect for those remote events where power isn't available. Sturdy metal construction allows mounting the unit on a shelf counter or slat-wall (brackets not included). Add this effective display to your showroom and enjoy a significant boost in your DENALI sales! Free with a qualifying "Starter Fluid" order. Contact your sales representative for more information.
This DENALI DRL wiring harness kit features high-quality waterproof components and is designed to power two DENALI DRL Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powersports vehicles. It’s clever d...
These unique turn signals were designed in collaboration with Analog Motorcycles to create the smallest possible turn signal that could still put out a significant amount of light. These signals are specifically designed for custom and sport applications where riders want a super low profile look but don't want to sacrifice functionality.
Please Note: If extra spacing is required to clear...
This package includes a complete D2 Auxiliary LED Light Kit and handlebar light mount. Specifically designed for ATVs Snowmobiles and Enduro Motorcycles this compact yet super bight lighting package will outshine your factory high beam and throw the light right where you want it as you turn your bars.
DENALI's LED DRL Pod was built to create the most amount of light from the smallest most low-profile housing possible. DRL Visibility Pods are unbelievably bright but will practically disappear once installed. The white and amber pods are compatible with a variety of mounting kits that enable the lights to b...
DENALI's LED DRL Pod was built to create the most amount of light from the smallest most low-profile housing possible. DRL Visibility Pods are unbelievably bright but will practically disappear once installed. The white and amber pods are compatible with a variety of mounting kits that enable the lights to b...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods 90 degrees to any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for installing DRLs down low on your motorcycles front fender or installing DRLs as backup lights on body panels and ATV cargo racks. This mount can also be used to position B6 brake light pods in the ideal...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods to the side of any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for tucking DRLs up inside a motorcycle fairing or positioning a pair of B6 brake light pods to the side of a license plate.
This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
This TriOptic™ Lens Kit for D7 lights is designed to maximize visibility in foggy and rainy conditions. Both Amber and Selective Yellow lens colors increases visibility in fog and rain by blocking blue frequencies from the light which reflect off water vapor and decrease vision.
This TriOptic™ Lens Kit for D4 lights is designed to maximize visibility in foggy and rainy conditions. Both Amber and Selective Yellow lens colors increases visibility in fog and rain by blocking blue frequencies from the light which reflect off water vapor and decrease vision. The kit includes two spot lenses and two True-Hybrid™ lenses. Use...
This TriOptic™ Lens Kit for D7 lights is designed to maximize visibility in foggy and rainy conditions. Both Amber and Selective Yellow lens colors increases visibility in fog and rain by blocking blue frequencies from the light which reflect off water vapor and decrease vision.
This longer wiring harness is optimized for installing DENALI auxiliary lights in full sized Jeeps trucks and cars. The harness features DENALI's clever HotSwap™ design that enables an effortless swap from the standard single-intensity relay to DENALI's Dual-Intensity DataDim™ Controller (sold separately) . Plug in the DataDim™ Contr...
Turn load resistors are necessary to prevent hyper flashing of the signals when swapping from incandescent to LED turns signals. Use these 10 Ohm Load Resistors to replace your original 21 Watt Turn Signals with DENALI Flush Mount Micro Turn Signals. Please Note: You will need one resistor for each turn signal being instal...
Turn load resistors are necessary to prevent hyper flashing of the signals when swapping from incandescent to LED turns signals. Use these 20 Ohm Load Resistors to replace your original 10 Watt Turn Signals with DENALI Flush Mount Micro Turn Signals. Please Note: You will need one resistor for each turn signal being ins...
