Protect valuable engine parts from debris and damage with the R&G Bash Plate Engine Guard Skid Plate. Made from 3 mm aluminum and powder coated black for strength and durability.
These bar end protectors are simple to fit and replace the OEM bar end weights. Helps to protect levers and clipons in the event of a tip over. Includes a replaceable end "slider" or puck.
Save yourself from costly repair bills and priceless riding time with these R&G Fork Protectors. A small spill or slide will no longer end your ride with damage to your fork front axle and brake calipers.
Your Husqvarna FS450 Supermoto is your investment in fun so protect one of its most vulnerable components the engine case with the R&G engine case guard set. This pair of guards is manufactured using durable 3mm powder coated aluminum. They cover the exposed motor casing wiring and other critical components of your motorcycle. Performing akin to a bash plate the R&G engine case guards prevent debris kicked up ...
Prevent unwanted and unsightly scuff damage to your swingarm or footgear with this R&G boot guard kit. The uniquely designed texture was designed to be durable and provide the rider with a buffer between their boot and the exposed areas of the swingarm and frame. The rubbing that occurs between them during cornering and braking maneuvers causes wear and damage to the swingarm and footwear both pote...
Fits Your 2008 Husqvarna Other ModelsChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G tank traction grips will enhance your braking and maneuvering skills on your supermoto machine. Simply peel off the backing and stick the pads to your side plastics on your Husqvarna FS450. The textured surface on the grips gives your legs something to hold onto helping you maintain your seating position without tearing up your gear. R&G uses a paint-friendly adhesive on the reverse side of the pads to ens...
Fits Your 2008 Husqvarna Other ModelsChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G aero style frame sliders provide essential protection during fall or slide by keeping critical components from contacting the ground. High Density Polyethylene (HDPE) bobbins are abrasion resistant and impact absorbing and designed to be the first point of contact with the pavement to prevent road rash and other severe damage. These protective sliders are mounted to the frame with de-embrittled bolts wh...
Universal Item Compatible With Your 2008 Husqvarna Other Models Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Universal Item Compatible With Your 2008 Husqvarna Other Models Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for motorcycles with 7/8in handlebars the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors available in multiple colors provide prote...
Universal Item Compatible With Your 2008 Husqvarna Other Models Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for the motorcycles with tapered handlebars the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle trip. Impact resistant deflectors available in multiple colors provide protecti...
Universal Item Compatible With Your 2008 Husqvarna Other Models Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Designed for dual sport enduro and trail motorcycles with 7/8in motorcycle handlebars the Barkbusters JET lever and wind protection handguards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands fro...
Universal Item Compatible With Your 2008 Husqvarna Other Models Add to cart
-
Information
Provide lever protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. Designed for motorcycles with 7/8 inch or 1-1/8 inch diameters the guards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters aluminum bar lever protection handgua...
Universal Item Compatible With Your 2008 Husqvarna Other Models Add to cart
-
Information
Barkbusters CARBON lever and wind protection handguards with the high tech properties of carbon fiber provide insurance against trip ending damage to your motorcycle's vulnerable clutch and brake controls. High tech carbon fiber wind deflectors cover solid full wrap heat treated aluminum backbone bars with secure two point mounting hardware to ensure defense against trip ending impacts. Ride longer and look great d...
Universal Item Compatible With Your 2008 Husqvarna Other Models Add to cart
-
Information
Barkbusters Aluminum Bar Lever Protection Handguards | No Plastics
Provide protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. These handguards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles using a 2-point handlebar mount and front fork mount (up to a 50mm fork tube diameter). Mount included. Shape fits a 7" diameter light bulb (8" diameter can) headlight. Features light smoke tint and precision-cut shape. <...
Adapter kit required for attaching Shad sidecases to SW-MOTECH Quick-Lock EVO carrier. Includes all hardware required to mount one pair of sidecases to your sideracks.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
Givi's first PLX-style sidecase! For use only with Givi PLX sidecarriers or SW-MOTECH Contour sidecarriers; not for use with Givi Monokey standard SW-MOTECH sidecarriers or Five-Stars sidecarriers. Clear lens.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
You have the best gear that the Twisted Team has scoured from every corner of the globe. Take the next logical step and customize your bike further with this collection of light-safe weather-proof vinyl decals.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
The Givi M5 Monokey Plate features a streamlined design with rugged nylon construction a black matte finish and is compatible with FZ or SR series GIVI top racks and all Monokey top cases.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
The new GIVI Trekker 46 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This kit is a...
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Requires Barkbuster Hand Guards specificy bike prior to ordering this product.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This ...
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
