Fits Your 2006 Ducati ST2 / ST4 / ST3Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpoilerScreen is a flat sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear smoke gray and gloss black.
Fits Your 2006 Ducati ST2 / ST4 / ST3Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
R&G Engine Case Covers are AMA Pro Racing approved. This R&G Racing Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the right hand side (RHS) crank case cover. Crafted from 4mm polypropylene for maximum grou...
Constructed of heavy-duty machined steel aluminum high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. Fits Ducati ST4/ST4S.
R&G Front Axle Sliders / Protectors for a host of Ducati Aprilia and Moto Guzzi motorcycles. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
The SHOCK2BK R&G Shocktube shock protector preserves the susceptible spring and damper from contaminants that can cause damage debris build up and corrosion. Premium bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon to successfully defend against the elements. This essential Shocktube should be the first addition to any new motorcycle to preserve the rear shock and the per...
MFW's bike specific Replacement Brackets allow direct replacement of your original footpegs with one of MFW's 3 styles of replacement footpegs. Compatible only with MFW footpegs (sold separately). Sold in pairs. Available in silver.
These Kaoko Throttle Lock Cruise Controls are purpose-built to reduce strain on hands and wrists as well as to provide speed maintenance and help reduce fuel consumption. Each throttle lock consists of a friction nut that is integral with a replacement handlebar-end weight.
Fits Your 2006 Ducati ST2 / ST4 / ST3Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your motorcycle from road debris and dirt with the R&G Fender Extender. Crafted from durable ABS plastic this guard is designed to block stones grit mud and water kicked up by the front wheel adding protection to your cooling system engine case exhaust pipes and fairing panels. Simple to install this kit mates directly to your motorcycle's front fender or mud shield using adhesive strips and push riv...
Fits Your 2006 Ducati ST2 / ST4 / ST3Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable passenger footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Add to cart
-
Information
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Add to cart
-
Information
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Add to cart
-
Information
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Yuasa has been powering motorcycles in the USA since 1979 and supplies more Original Equipment Batteries to manufacturers than any other brand.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Add to cart
-
Information
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Add to cart
-
Information
At 113 decibels the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough be heard with the SoundBomb Mini.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Add to cart
-
Information
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Increase storage capacity for small items and important documents that are always within reach using the Givi leg wallet. Made of durable 600D polyester PVC and available in grey black or black/grey with red trim . Each color features reflectivity for enhanced visibility. Adjustable straps allow this versatile leg wallet to be worn around the waist or thigh for quick access that doesn't get in the way while on or of...
Universal Item Compatible With Your 2006 Ducati ST2 / ST4 / ST3 Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G motorcycle rim tape is a 16 piece modular system designed for adding a touch of bad ass and visibility to your bike. Available in many colors to suit your aesthetic the wheel stripes are easy to install in whatever configuration works for you. The tire rim tape is designed to fit 17" motorcycle wheels with precision. No special tools or techniques required for installation just place and go!
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
For use with Pro Taper SE (seven-eighths) alloy handlebars and other aluminum handlebars with a smaller internal diameter than standard steel handlebars.
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This ...
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles using a 2-point handlebar mount and front fork mount (up to a 50mm fork tube diameter). Mount included. Shape fits a 7" diameter light bulb (8" diameter can) headlight. Features light smoke tint and precision-cut shape. <...
The new GIVI Trekker 46 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This kit is a...
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Note: The Givi E68 Backrest for E36 or E45 luggage cases has been discontinued and is no longer able to be ordered.High-density black rubber backrest for the Givi E45 & E36 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Mounts using included studs and nuts. Requires minor drilling of the topcase using the supplied pa...
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
Adapter kit required for attaching Shad sidecases to SW-MOTECH Quick-Lock EVO carrier. Includes all hardware required to mount one pair of sidecases to your sideracks.
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
Givi's first PLX-style sidecase! For use only with Givi PLX sidecarriers or SW-MOTECH Contour sidecarriers; not for use with Givi Monokey standard SW-MOTECH sidecarriers or Five-Stars sidecarriers. Clear lens.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Requires Barkbuster Hand Guards specificy bike prior to ordering this product.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
