Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpoilerScreen is a flat sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear smoke gray and gloss black.
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA X-Creen Bolt-On Variable Windscreen Spoiler Blade is available to fit most original motorcycle windshields. This bolt-on style requires you to drill holes in your existing screen. Available in clear or light smoke.
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailAdd to cart
-
Information
Kaoko Cruise Controls are purpose-built for Aprilia Pegaso Trail 650 '06-'14 SL1000 Falco '00-'05 Mana 850GT '09-'15 & SL750 Shiver '07-'15 with M6 threaded insert welded in end of handlebar. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA X-Creen Sport Add-On Variable Windscreen Spoiler Blade is an ideal size for small scooters and sportbikes. This spoiler is available to fit most original motorcycle windshields to act as an adjustable wind deflector that will be set to redirect the air flow just the way you want it. Available in clear or light smoke.
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailAdd to cart
-
Information
Replace the factory windscreen on your motorcycle with the GIVI D237S windshield for the Aprilia Pegaso. Simple to install and with generous 17.2 inch tall by 12.79 inch width measurements this screen will provide a more comfortable ride. Ride longer by installing the D237S windshield by GIVI.
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (7/8 in) 20mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place th...
Fits Your 2000 Aprilia Pegaso 650 / Strada / TrailChoose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (2 in) 50 mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place the...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for motorcycles with 7/8in handlebars the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors available in multiple colors provide prote...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Designed for dual sport enduro and trail motorcycles with 7/8in motorcycle handlebars the Barkbusters JET lever and wind protection handguards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands fro...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D66 includes one D28 and one D38 dry bag to create 66 liters of 100% waterproof storage. Modular packing has significant advantages over a single bag of the same volume. The two-bag D66 system makes packing and organizing your gear easier allows for quicker access to your gear and enables strategic separation of your gear; keeping your clean clothes separate...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Yuasa has been powering motorcycles in the USA since 1979 and supplies more Original Equipment Batteries to manufacturers than any other brand.
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Add to cart
-
Information
Provide lever protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. Designed for motorcycles with 7/8 inch or 1-1/8 inch diameters the guards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters aluminum bar lever protection handgua...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Add to cart
-
Information
Safeguard your motorcycle levers with the strong yet lightweight properties of carbon fiber with the Barkbusters CARBON wind and lever protection handguards. High tech carbon fiber wind deflectors cover full wrap solid heat treated aluminum backbone bars with secure two point mounting hardware to ensure defense against trip ending impacts. Keep your motorcycle ride going with the stylish lever and wind protection of...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Correct your position and ride in comfort with the Rox Block Offset Risers for 22mm or 28mm handlebars on select BMW Honda KTM & Kawasaki motorcycles. These ergonomically friendly risers can be oriented in either direction allowing you to move your handlebars up and either forward or back approximately 1.25 inches relieving the pressure that can build up on your wrists forearms and neck. These han...
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in.
Universal Item Compatible With Your 2000 Aprilia Pegaso 650 / Strada / Trail Add to cart
-
Information
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures plus it makes your bike look like a space man.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
Givi's first PLX-style sidecase! For use only with Givi PLX sidecarriers or SW-MOTECH Contour sidecarriers; not for use with Givi Monokey standard SW-MOTECH sidecarriers or Five-Stars sidecarriers. Clear lens.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
The Givi M5 Monokey Plate features a streamlined design with rugged nylon construction a black matte finish and is compatible with FZ or SR series GIVI top racks and all Monokey top cases.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
You have the best gear that the Twisted Team has scoured from every corner of the globe. Take the next logical step and customize your bike further with this collection of light-safe weather-proof vinyl decals.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
The RAM "Magnetic Power Plate III" is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets rubber cradle and two adhesive metal plates. To mount your device to the magnet you will need to attach one of the metal plates to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back. This kit...
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Requires Barkbuster Hand Guards specificy bike prior to ordering this product.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
