DENALI just released a software update for the CANsmart Controller!

 

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four electrical accessories to enable dozens of customizable settings that can be controlled right from the CANsmar Accessory Manager Software. 

The CANsmart’s four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light. Other electronic devices such as heated gear, GPS units, and traffic cameras can be powered using the CANsmart as well. This device is available for select BMW, Harley Davidson and KTM motorcycles.

 

CANsmart Software V2009.1 Updates Include:
-New Heated Gear Functionality

-New KTM ABS Dongle Functionality

-Increased Accessory Turn Off Delay – Up to 60 seconds

-Added Ignition Switched Output to Accessory 3rd Wire

 

Here is a screenshot of the CANsmart™ Software home screen. The top row shows each of the four circuits and displays the accessory type you have selected for that circuit. The sections below correspond to each of your accessory circuits and allow you to review and change all of the accessory features and settings. This screenshot shows the default setting applied. 

DENALI Electronics CANsmart Software

Download the latest DENALI CANsmart Software version here: https://denalielectronics.com/pages/cansmart-software

 

DENALI Electronics CANsmart Controller

Leave a Reply

Add a comment