DENALI Launches DialDim Plug and Play Kits for KLR650, Pan America, Tenere 700, and Africa Twin
The new DENALI DialDim is a groundbreaking universal lighting controller that can control two independent light circuits all from the convenient and easy to operate halo switch. Each circuit is electronically fused and is pre-wired to connect to your existing DENALI lights. DENALI has raised the bar again by releasing a handful of plug and play kits to outfit the DialDim to popular motorcycles like the Harley Davidson PanAmerica, Honda Africa Twin, Kawasaki KLR650, and Yamaha Tenere 700.
Each pre-configured product bundle includes the standard DialDim Lighting Controller and a motorcycle specific plug-&-play wiring harness. The vehicle-specific harness simply plugs in-line at the vehicle headlight, horn, and turn signal connectors to enable dozens of useful lighting features and settings.
DENALI DialDim Features:
ON/OFF & Dim – Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
High/Low Sync – Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle’s high beam circuit to enable this feature.
Stealth Mode – A clever 0% dim setting on the switch allows your lights to be “off” during normal driving conditions but will jump to 100% intensity with your vehicle’s high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
Cancel with Turn Signal – When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent “washing out” your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Flash as Turn Signal – When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Strobe with Horn – When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
Electronically Fused Circuits – Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fuse is tripped.
Voltage Display Indicator – Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
Low Voltage Cutoff – If the battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
DENALI DialDim Specifications
- Two fully independent light circuits
- Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
- Eight electronic fuse values (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
- Five feature input wires (ignition, high beam, horn, left turn, right turn)
- 20A max per circuit (30A max combined)
- Operating Voltage: 12 VDC
The universal DENALI DialDim Controller is a game changer and the new plug and play kits make installing the DialDim extremely simple. The DialDim is the perfect solution for the user that wants to install a couple of light sets and access a ton of usable features without breaking the bank. This is a brand new product and is expected to arrive March 15, 2022, pre-order now to secure your kit!